DG4244 Port Forwarding - Revision history

Gc884 at 21:22, 21 August 2026

2026-08-21T21:22:57Z

← Older revision		Revision as of 21:22, 21 August 2026
Line 10:		Line 10:
	#Click '''+ Add Service''' to create a new rule.		#Click '''+ Add Service''' to create a new rule.
	#Fill in the following fields for the rule:		#Fill in the following fields for the rule:
			##Common Service: other unless specified
	##Service Name: A label to identify the rule (e.g., "Security Camera")		##Service Name: A label to identify the rule (e.g., "Security Camera")
	##Type ~~Protocol~~: TCP, UDP, or both.		##Service Type: TCP, UDP, or both.
			##Server IPv4 / Server IPv6: The local IP address of the device the traffic should be sent to.
	##Start Port / End Port: The port or port range to forward.		##Start Port / End Port: The port or port range to forward.
	~~##Server IPv4 / Server IPv6: The local IP address of the device the traffic should be sent to.~~
	~~##Active Toggle: to enable/disable this specific rule.~~
	#Save the rule. It will now appear in the Port Forwarding table.		#Save the rule. It will now appear in the Port Forwarding table.
	#Repeat steps 5–7 for any additional services you need to forward.		#Repeat steps 5–7 for any additional services you need to forward.
Line 23:		Line 23:
	File: Port Forwarding DG42442.png		File: Port Forwarding DG42442.png
	</gallery>		</gallery>

	{{Template:Back_to_the_Top}}		{{Template:Back_to_the_Top}}

Gc884 at 21:20, 21 August 2026

2026-08-21T21:20:01Z

← Older revision		Revision as of 21:20, 21 August 2026
Line 12:		Line 12:
	##Service Name: A label to identify the rule (e.g., "Security Camera")		##Service Name: A label to identify the rule (e.g., "Security Camera")
	##Type Protocol: TCP, UDP, or both.		##Type Protocol: TCP, UDP, or both.
	##Start Port / End Port: The port or port range to forward.		##Start Port / End Port: The port or port range to forward.
	##Server IPv4 / Server IPv6: The local IP address of the device the traffic should be sent to.		##Server IPv4 / Server IPv6: The local IP address of the device the traffic should be sent to.
	##Active Toggle: to enable/disable this specific rule.		##Active Toggle: to enable/disable this specific rule.
	#Save the rule. It will now appear in the Port Forwarding table.		#Save the rule. It will now appear in the Port Forwarding table.
Line 19:		Line 19:

	==Images==		==Images==
	[[File: Port Forwarding DG4244.png]]		<gallery mode="slideshow">
			File: Port Forwarding DG4244.png
			File: Port Forwarding DG42442.png
			</gallery>
			{{Template:Back_to_the_Top}}

Gc884: Created page with "Port forwarding allows you to open specific ports on the DG4244 so that incoming traffic from the internet can be directed to a specific device on your local network. This can..."

2026-08-21T21:08:13Z

Created page with "Port forwarding allows you to open specific ports on the DG4244 so that incoming traffic from the internet can be directed to a specific device on your local network. This can..."

New page

Port forwarding allows you to open specific ports on the DG4244 so that incoming traffic from the internet can be directed to a specific device on your local network. This can be useful for services such as game servers, security cameras, or self-hosted applications.

Port forwarding is available only when the modem is operating in routed mode. In bridge mode, traffic passes through the modem without Network Address Translation (NAT), so port forwarding rules are not managed by the modem.

==Add a Port Forwarding Service==
#Open a browser and go to http://192.168.0.1.
#Log in with your admin credentials.
#In the left-hand menu, click '''Advanced''', then select '''Port Forwarding'''.
#Click '''Enable''' to turn on port forwarding (it's disabled by default).
#Click '''+ Add Service''' to create a new rule.
#Fill in the following fields for the rule:
##Service Name: A label to identify the rule (e.g., "Security Camera")
##Type Protocol: TCP, UDP, or both.
##Start Port / End Port: The port or port range to forward.
##Server IPv4 / Server IPv6: The local IP address of the device the traffic should be sent to.
##Active Toggle: to enable/disable this specific rule.
#Save the rule. It will now appear in the Port Forwarding table.
#Repeat steps 5–7 for any additional services you need to forward.

==Images==
[[File: Port Forwarding DG4244.png]]