SmartRG SR505n - Revision history

Xx176: /* Modes of Operation */

2021-09-26T20:05:36Z

Modes of Operation

← Older revision		Revision as of 20:05, 26 September 2021
Line 18:		Line 18:

	==Modes of Operation==		==Modes of Operation==
	# [[~~SmartRG_SR505n_Configuration~~#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.		# [[SmartRG_SR505N_Configuration#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.
	# [[SmartRG_SR505N_Configuration#Bridge_Operation\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.		# [[SmartRG_SR505N_Configuration#Bridge_Operation\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.

Xx176: /* Methods */

2021-09-26T20:05:19Z

Methods

← Older revision		Revision as of 20:05, 26 September 2021
Line 15:		Line 15:
	If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR505n Config from File\|instructions to configure your modem with a config file]].		If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR505n Config from File\|instructions to configure your modem with a config file]].

	Alternatively, you can follow the instructions below to configure the modem [[~~SmartRG_SR505n_Configuration~~#Routed_Operation_with_Wi-Fi\|without a config file]].		Alternatively, you can follow the instructions below to configure the modem [[SmartRG_SR505N_Configuration#Routed_Operation_with_Wi-Fi\|without a config file]].

	==Modes of Operation==		==Modes of Operation==
	# [[SmartRG_SR505n_Configuration#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.		# [[SmartRG_SR505n_Configuration#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.

Xx176 at 20:04, 26 September 2021

2021-09-26T20:04:38Z

← Older revision		Revision as of 20:04, 26 September 2021
Line 15:		Line 15:
	If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR505n Config from File\|instructions to configure your modem with a config file]].		If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR505n Config from File\|instructions to configure your modem with a config file]].

	Alternatively, you can follow the instructions below to configure the modem [[~~SmartRG SR506n Routed Configuration~~#~~with WiFi~~\|without a config file]].		Alternatively, you can follow the instructions below to configure the modem [[SmartRG_SR505n_Configuration#Routed_Operation_with_Wi-Fi\|without a config file]].
	==Modes of Operation==		==Modes of Operation==
	# [[~~https://help.ncf.ca/SmartRG_SR505N_Configuration~~#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.		# [[SmartRG_SR505n_Configuration#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.
	# [[~~https://help.ncf.ca/~~SmartRG_SR505N_Configuration#Bridge_Operation\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.		# [[SmartRG_SR505N_Configuration#Bridge_Operation\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.

	<!-- = Images =		<!-- = Images =

Xx176: /* Modes of Operation */

2021-09-26T20:03:14Z

Modes of Operation

← Older revision		Revision as of 20:03, 26 September 2021
Line 17:		Line 17:
	Alternatively, you can follow the instructions below to configure the modem [[SmartRG SR506n Routed Configuration#with WiFi\|without a config file]].		Alternatively, you can follow the instructions below to configure the modem [[SmartRG SR506n Routed Configuration#with WiFi\|without a config file]].
	==Modes of Operation==		==Modes of Operation==
	# [[~~SmartRG_SR505n_Routed_Configuration~~\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.		# [[https://help.ncf.ca/SmartRG_SR505N_Configuration#Routed_Operation_with_Wi-Fi\|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.
	# [[~~SmartRG_SR505n_Bridge_Configuration~~\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.		# [[https://help.ncf.ca/SmartRG_SR505N_Configuration#Bridge_Operation\|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.

	<!-- = Images =		<!-- = Images =

Xx176: /* Preparation */

2021-09-26T19:43:45Z

Preparation

← Older revision		Revision as of 19:43, 26 September 2021
Line 8:		Line 8:
	# '''Factory Settings:''' The instructions are for configuring the modem new out of the box or after it is been reset to factory settings. If the modem is not new, we recommend resetting it by '''holding down the reset button with a paper clip for about 10 seconds'''.		# '''Factory Settings:''' The instructions are for configuring the modem new out of the box or after it is been reset to factory settings. If the modem is not new, we recommend resetting it by '''holding down the reset button with a paper clip for about 10 seconds'''.
	#* We recommend these settings for most NCF members. To learn more about what the settings do and more advanced settings, consult the [[Modem Manuals\|manual]].		#* We recommend these settings for most NCF members. To learn more about what the settings do and more advanced settings, consult the [[Modem Manuals\|manual]].
	#'''Ethernet Connection:''' Consult the [https://www.ncf.ca/ncf/support/w/images/5/50/~~About_your_SmartRG_SR505n~~.pdf About your SmartRG SR506n modem instruction sheet] to learn how to connect the modem''. We recommend configuring the modem using a computer connected by an ethernet cable, as opposed to over a wireless connection.''		#'''Ethernet Connection:''' Consult the [https://www.ncf.ca/ncf/support/w/images/8/86/About_Your_SmartRG_SR505n.pdf About your SmartRG SR506n modem instruction sheet] to learn how to connect the modem''. We recommend configuring the modem using a computer connected by an ethernet cable, as opposed to over a wireless connection.''
	=Configuration=		=Configuration=
	Before the modem will connect to the Internet, it needs to be configured with your NCF account information. You can follow our instructions to configure the modem yourself, or contact [mailto:support@ncf.ca support@ncf.ca] if you would like to bring your modem to our office to be configured.		Before the modem will connect to the Internet, it needs to be configured with your NCF account information. You can follow our instructions to configure the modem yourself, or contact [mailto:support@ncf.ca support@ncf.ca] if you would like to bring your modem to our office to be configured.

	==Methods==		==Methods==
	If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG ~~SR506n~~ Config from File\|instructions to configure your modem with a config file]].		If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR505n Config from File\|instructions to configure your modem with a config file]].

	Alternatively, you can follow the instructions below to configure the modem [[SmartRG SR506n Routed Configuration#with WiFi\|without a config file]].		Alternatively, you can follow the instructions below to configure the modem [[SmartRG SR506n Routed Configuration#with WiFi\|without a config file]].

Xx176 at 19:42, 26 September 2021

2021-09-26T19:42:03Z

← Older revision		Revision as of 19:42, 26 September 2021
Line 5:		Line 5:

	Before you start configuring the modem:		Before you start configuring the modem:
	# '''Firmware Check:''' Check that your [[SmartRG ~~SR506n~~ Firmware\|firmware is up to date]] or update to the recommended version. If you have a different firmware version, the screenshots and instructions might not match exactly. Contact [http://mailto:support@ncf.ca support@ncf.ca] if you need assistance.		# '''Firmware Check:''' Check that your [[SmartRG SR505n Firmware\|firmware is up to date]] or update to the recommended version. If you have a different firmware version, the screenshots and instructions might not match exactly. Contact [http://mailto:support@ncf.ca support@ncf.ca] if you need assistance.
	# '''Factory Settings:''' The instructions are for configuring the modem new out of the box or after it is been reset to factory settings. If the modem is not new, we recommend resetting it by '''holding down the reset button with a paper clip for about 10 seconds'''.		# '''Factory Settings:''' The instructions are for configuring the modem new out of the box or after it is been reset to factory settings. If the modem is not new, we recommend resetting it by '''holding down the reset button with a paper clip for about 10 seconds'''.
	#* We recommend these settings for most NCF members. To learn more about what the settings do and more advanced settings, consult the [[Modem Manuals\|manual]].		#* We recommend these settings for most NCF members. To learn more about what the settings do and more advanced settings, consult the [[Modem Manuals\|manual]].
	#'''Ethernet Connection:''' Consult the [https://www.ncf.ca/ncf/support/w/images/5/50/~~About_your_SmartRG_SR506n~~.pdf About your SmartRG SR506n modem instruction sheet] to learn how to connect the modem''. We recommend configuring the modem using a computer connected by an ethernet cable, as opposed to over a wireless connection.''		#'''Ethernet Connection:''' Consult the [https://www.ncf.ca/ncf/support/w/images/5/50/About_your_SmartRG_SR505n.pdf About your SmartRG SR506n modem instruction sheet] to learn how to connect the modem''. We recommend configuring the modem using a computer connected by an ethernet cable, as opposed to over a wireless connection.''
	=Configuration=		=Configuration=
	Before the modem will connect to the Internet, it needs to be configured with your NCF account information. You can follow our instructions to configure the modem yourself, or contact [mailto:support@ncf.ca support@ncf.ca] if you would like to bring your modem to our office to be configured.		Before the modem will connect to the Internet, it needs to be configured with your NCF account information. You can follow our instructions to configure the modem yourself, or contact [mailto:support@ncf.ca support@ncf.ca] if you would like to bring your modem to our office to be configured.

Xx176: /* Preparation */

2021-09-26T19:41:39Z

Preparation

← Older revision		Revision as of 19:41, 26 September 2021
Line 1:		Line 1:
	<div class="ncfrightbox w-25"> {{Template:SmartRG SR505n}} </div>		<div class="ncfrightbox w-25"> {{Template:SmartRG SR505n}} </div>
	=Preparation=		=Preparation=
	~~'''Updated: 2019-07-24'''~~

	The SmartRG SR505n modem router supports both ADSL and VDSL, and switches automatically to match the line it is connected to.		The SmartRG SR505n modem router supports both ADSL and VDSL, and switches automatically to match the line it is connected to.
	* Note: Fees for changing plans apply, see our [[DSL ~~Rates~~]].		* Note: Fees for changing plans apply, see our [[Pricing\|DSL Pricing]].

	Before you start configuring the modem:		Before you start configuring the modem:

Xx176: Created page with "
{{Template:SmartRG SR505n}}
=Preparation= '''Updated: 2019-07-24''' The SmartRG SR505n modem router supports both ADSL and VDSL, and swi..."

2021-09-26T19:40:48Z

Created page with "<div class="ncfrightbox w-25"> {{Template:SmartRG SR505n}} </div> =Preparation= '''Updated: 2019-07-24''' The SmartRG SR505n modem router supports both ADSL and VDSL, and swi..."

New page

<div class="ncfrightbox w-25"> {{Template:SmartRG SR505n}} </div>
=Preparation=
'''Updated: 2019-07-24'''

The SmartRG SR505n modem router supports both ADSL and VDSL, and switches automatically to match the line it is connected to.
* Note: Fees for changing plans apply, see our [[DSL Rates]].

Before you start configuring the modem:
# '''Firmware Check:''' Check that your [[SmartRG SR506n Firmware|firmware is up to date]] or update to the recommended version. If you have a different firmware version, the screenshots and instructions might not match exactly. Contact [http://mailto:support@ncf.ca support@ncf.ca] if you need assistance.
# '''Factory Settings:''' The instructions are for configuring the modem new out of the box or after it is been reset to factory settings. If the modem is not new, we recommend resetting it by '''holding down the reset button with a paper clip for about 10 seconds'''.
#* We recommend these settings for most NCF members. To learn more about what the settings do and more advanced settings, consult the [[Modem Manuals|manual]].
#'''Ethernet Connection:''' Consult the [https://www.ncf.ca/ncf/support/w/images/5/50/About_your_SmartRG_SR506n.pdf About your SmartRG SR506n modem instruction sheet] to learn how to connect the modem''. We recommend configuring the modem using a computer connected by an ethernet cable, as opposed to over a wireless connection.''
=Configuration=
Before the modem will connect to the Internet, it needs to be configured with your NCF account information. You can follow our instructions to configure the modem yourself, or contact [mailto:support@ncf.ca support@ncf.ca] if you would like to bring your modem to our office to be configured.

==Methods==
If you have access to email, we can send you a file to automatically configure the modem with your NCF account and our recommended settings, which is much easier than going through all the steps manually. You can request a config file from [mailto:support@ncf.ca support@ncf.ca] then follow our [[SmartRG SR506n Config from File|instructions to configure your modem with a config file]].

Alternatively, you can follow the instructions below to configure the modem [[SmartRG SR506n Routed Configuration#with WiFi|without a config file]].
==Modes of Operation==
# [[SmartRG_SR505n_Routed_Configuration|Routed]] - Functions as both a modem and WiFi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.
# [[SmartRG_SR505n_Bridge_Configuration|Bridge]] - '''(Advanced)''' Functions only as a modem, so another device is required to make the PPPoE connection. Recommended for advanced members using a separate router.



=See Also=
{{Template:Back_to_the_Top}}
*[[:Category:Modems|Modem Configuration]] - Instructions for all NCF modems
*[[Modem Lights#SmartRG|About SmartRG modem lights]]
*[[Changing WiFi Channels on SmartRG modems]]
*[[Dynamic DNS]]
*[[Port forwarding#Port_forwarding_on_SmartRG_Modems|Port forwarding with the SmartRG SR505N]]

[[Category:DSL]]
[[Category:Modems]]

SmartRG SR505n - Revision history

Xx176: /* Modes of Operation */

Xx176: /* Methods */

Xx176 at 20:04, 26 September 2021

Xx176: /* Modes of Operation */

Xx176: /* Preparation */

Xx176 at 19:42, 26 September 2021

Xx176: /* Preparation */

Xx176: Created page with " {{Template:SmartRG SR505n}} =Preparation= '''Updated: 2019-07-24''' The SmartRG SR505n modem router supports both ADSL and VDSL, and swi..."

Xx176: Created page with "
{{Template:SmartRG SR505n}}
=Preparation= '''Updated: 2019-07-24''' The SmartRG SR505n modem router supports both ADSL and VDSL, and swi..."