SmartRG SR506n Bridge Configuration - Revision history

Xx176 at 19:53, 12 February 2019

2019-02-12T19:53:05Z

← Older revision		Revision as of 19:53, 12 February 2019
Line 2:		Line 2:
	{{Template:SmartRG Config Options}}		{{Template:SmartRG Config Options}}

	If you prefer using your own external router to the one built into your SmartRG unit, we recommend [[#~~Routed Operation~~ with separate WiFi Router\|routed operation with a separate WiFi Router]]. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your SmartRG for Bridged operation:		If you prefer using your own external router to the one built into your SmartRG unit, we recommend [[SmartRG SR506n Routed Configuration#with separate WiFi Router\|routed operation with a separate WiFi Router]]. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your SmartRG for Bridged operation:
	# Once you complete configuring your SmartRG modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible with Auto DHCP settings on your computer. We recommend:		# Once you complete configuring your SmartRG modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible with Auto DHCP settings on your computer. We recommend:
	#* '''Backup Settings:''' It is particularly important to backup the '''Running Settings''' on your modem before and after you configure it.		#* '''Backup Settings:''' It is particularly important to backup the '''Running Settings''' on your modem before and after you configure it.

Fy792 at 13:37, 30 August 2018

2018-08-30T13:37:24Z

← Older revision		Revision as of 13:37, 30 August 2018
Line 1:		Line 1:
	<div class="ncfrightbox w-20"> {{Template:SmartRG SR506n}} </div>		<div class="ncfrightbox w-25"> {{Template:SmartRG SR506n}} </div>
	{{Template:SmartRG Config Options}}		{{Template:SmartRG Config Options}}

Fy792 at 13:36, 30 August 2018

2018-08-30T13:36:07Z

← Older revision		Revision as of 13:36, 30 August 2018
Line 125:		Line 125:
	\|}		\|}
	{{Template:Back_to_the_Top}}		{{Template:Back_to_the_Top}}

			=See Also=
			{{Template:Back_to_the_Top}}
			*[[Modem Configuration]] - Instructions for all NCF modems
			*[[Modem Lights#SmartRG\|About SmartRG modem lights]]
			*[[:File:Changing_Wireless_Channels_on_SmartRG_SR505N.pdf\|SmartRG SR505N Changing WiFi Channels]]
			*[[Dynamic DNS]]
			*[[Port forwarding#Port_forwarding_on_SmartRG_Modems\|Port forwarding with the SmartRG SR505N]]

	[[Category:DSL]]		[[Category:DSL]]
	[[Category:Modems]]		[[Category:Modems]]

Xx176 at 15:56, 29 August 2018

2018-08-29T15:56:30Z

← Older revision		Revision as of 15:56, 29 August 2018
Line 1:		Line 1:
	<div class="ncfrightbox w-20 ~~min-w-20rem ncfboxborder~~">		<div class="ncfrightbox w-20"> {{Template:SmartRG SR506n}} </div>
	~~<div class="ncfboxtitle ncfcenter"> SmartRG SR506N Links</div>~~
	~~<div class="ncfboxcontents">~~
	{{Template:SmartRG SR506n ~~Links~~}}
	~~</div>~~
	</div>

	{{Template:SmartRG Config Options}}		{{Template:SmartRG Config Options}}

Xx176 at 15:34, 29 August 2018

2018-08-29T15:34:09Z

← Older revision		Revision as of 15:34, 29 August 2018
Line 15:		Line 15:
	# If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.		# If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.

	~~== Checklist ==~~
	{\| class="wikitable mw-collapsible"		{\| class="wikitable mw-collapsible"
	\|+Steps to Configure SR506N for Bridge Operation		\|+Steps to Configure SR506N for Bridge Operation

Xx176 at 15:32, 29 August 2018

2018-08-29T15:32:12Z

← Older revision		Revision as of 15:32, 29 August 2018
Line 2:		Line 2:
	<div class="ncfboxtitle ncfcenter"> SmartRG SR506N Links</div>		<div class="ncfboxtitle ncfcenter"> SmartRG SR506N Links</div>
	<div class="ncfboxcontents">		<div class="ncfboxcontents">
	{{Template:SmartRG SR506n Links}} </div>		{{Template:SmartRG SR506n Links}}
			</div>
	</div>		</div>

	{{Template:SmartRG Config Options}}		{{Template:SmartRG Config Options}}

	If you prefer your own external router ~~rather than~~ the one built into your SmartRG unit, we recommend [[#Routed Operation with separate WiFi Router\|routed operation with a separate WiFi Router]]. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your SmartRG for Bridged operation:		If you prefer using your own external router to the one built into your SmartRG unit, we recommend [[#Routed Operation with separate WiFi Router\|routed operation with a separate WiFi Router]]. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your SmartRG for Bridged operation:
	# Once you complete configuring your SmartRG modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible ~~and you may not be able to regain access to it until you reset the modem~~.		# Once you complete configuring your SmartRG modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible with Auto DHCP settings on your computer. We recommend:
	#* '''Backup Settings:''' It is particularly important to backup the '''Running Settings''' on your modem before and after you configure it.		#* '''Backup Settings:''' It is particularly important to backup the '''Running Settings''' on your modem before and after you configure it.
	#* '''~~To reset~~ the modem:''' If you need to reset the modem, insert a paper-clip in the '''Reset''' hole on the back. Hold for 10 seconds to reset.		#* '''Manual IP''': Setting a static IPv4 address on your computer, with the gateway IP set to http://192.168.1.1 to regain access to the modem
			#* '''Reset the modem:''' If you need to reset the modem, insert a paper-clip in the '''Reset''' hole on the back. Hold for 10 seconds to reset.
	# If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.		# If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.

Line 22:		Line 24:
	\|-		\|-
	\|1		\|1
	\|~~[[#~~Log into Modem ~~Web Interface\|Log into Modem]]~~		\|Log into Modem
	\|<nowiki>http://192.168.1.1</nowiki>		\|<nowiki>http://192.168.1.1</nowiki>

Line 31:		Line 33:
	\|-		\|-
	\|2		\|2
	\|~~[[#~~WAN Cleanup~~\|WAN Cleanup]]~~		\|WAN Cleanup
	\|'''Advanced Setup'''		\|'''Advanced Setup'''
	'''→ WAN Service'''		'''→ WAN Service'''
Line 37:		Line 39:
	\|-		\|-
	\|3		\|3
	\|~~[[#~~Enable ADSL ~~Interface\|Enable ADSL]]~~		\|Enable ADSL
	\|'''Advanced Setup'''		\|'''Advanced Setup'''
	'''→ Layer2 Interface'''		'''→ Layer2 Interface'''
Line 46:		Line 48:
	\|-		\|-
	\|4		\|4
	\|~~[[#~~Enable VDSL ~~Interface\|Enable VDSL]]~~		\|Enable VDSL
	\|'''Advanced Setup'''		\|'''Advanced Setup'''
	'''→ Layers2 Interface'''		'''→ Layers2 Interface'''
Line 75:		Line 77:
	\|-		\|-
	\|11		\|11
	\|~~[[SmartRG SR506N Configuration#~~Admin Password~~\|Admin Password]]~~		\|Admin Password
	\|'''Management'''		\|'''Management'''
	'''→ Access Controls'''		'''→ Access Controls'''
Line 87:		Line 89:
	\|-		\|-
	\|12		\|12
	\|~~[[#~~Disable Support~~\|Disable Support]]~~		\|Disable Support
	\|'''Management'''		\|'''Management'''
	'''→ Accounts'''		'''→ Accounts'''
Line 99:		Line 101:
	\|-		\|-
	\|13		\|13
	\|~~[[#~~Remote Access~~\|Remote Access]]~~		\|Remote Access
	\|'''Management'''		\|'''Management'''

Line 108:		Line 110:
	\|-		\|-
	\|14		\|14
	\|~~[[#~~System Log~~\|System Log]]~~		\|System Log
	\|'''Management'''		\|'''Management'''

Line 119:		Line 121:
	\|-		\|-
	\|16		\|16
	\|~~[[#~~Backup Settings~~\|Backup Settings]]~~		\|Backup Settings
	\|'''Management'''		\|'''Management'''

Xx176 at 15:26, 29 August 2018

2018-08-29T15:26:17Z

← Older revision		Revision as of 15:26, 29 August 2018
Line 14:		Line 14:

	== Checklist ==		== Checklist ==
	~~{{Template:Back_to_the_Top}}~~

	{\| class="wikitable mw-collapsible"		{\| class="wikitable mw-collapsible"
	\|+Steps to Configure SR506N for Bridge Operation		\|+Steps to Configure SR506N for Bridge Operation

Xx176 at 15:25, 29 August 2018

2018-08-29T15:25:43Z

← Older revision		Revision as of 15:25, 29 August 2018
Line 1:		Line 1:
	= ~~Bridge Operation~~=		<div class="ncfrightbox w-20 min-w-20rem ncfboxborder">
	{{Template:~~Back_to_the_Top~~}}		<div class="ncfboxtitle ncfcenter"> SmartRG SR506N Links</div>
			<div class="ncfboxcontents">
			{{Template:SmartRG SR506n Links}} </div>
			</div>

	{{Template:SmartRG Config Options}}		{{Template:SmartRG Config Options}}

Line 127:		Line 131:
	* Save backup file to computer		* Save backup file to computer
	\|}		\|}
			{{Template:Back_to_the_Top}}

			[[Category:DSL]]
			[[Category:Modems]]

Xx176: Created page with "= Bridge Operation= {{Template:Back_to_the_Top}} {{Template:SmartRG Config Options}} If you prefer your own external router rather than the one built into your SmartRG unit,..."

2018-08-29T15:24:23Z

Created page with "= Bridge Operation= {{Template:Back_to_the_Top}} {{Template:SmartRG Config Options}} If you prefer your own external router rather than the one built into your SmartRG unit,..."

New page

= Bridge Operation=
{{Template:Back_to_the_Top}}
{{Template:SmartRG Config Options}}

If you prefer your own external router rather than the one built into your SmartRG unit, we recommend [[#Routed Operation with separate WiFi Router|routed operation with a separate WiFi Router]]. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your SmartRG for Bridged operation:
# Once you complete configuring your SmartRG modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible and you may not be able to regain access to it until you reset the modem.
#* '''Backup Settings:''' It is particularly important to backup the '''Running Settings''' on your modem before and after you configure it.
#* '''To reset the modem:''' If you need to reset the modem, insert a paper-clip in the '''Reset''' hole on the back. Hold for 10 seconds to reset.
# If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.

== Checklist ==
{{Template:Back_to_the_Top}}

{| class="wikitable mw-collapsible"
|+Steps to Configure SR506N for Bridge Operation
!
!Steps
!Menu Navigation
!Parameters
|-
|1
|[[#Log into Modem Web Interface|Log into Modem]]
|<nowiki>http://192.168.1.1</nowiki>

'''→ Manage Gateway (Advanced)'''
|User Name: '''admin'''

Password: '''admin'''
|-
|2
|[[#WAN Cleanup|WAN Cleanup]]
|'''Advanced Setup'''
'''→ WAN Service'''
|Remove '''ppp0.1''' from '''WAN''' Service Table
|-
|3
|[[#Enable ADSL Interface|Enable ADSL]]
|'''Advanced Setup'''
'''→ Layer2 Interface'''

'''→ ATM Interface'''
|Add ATM: vpi:'''0''' vci:'''35'''
DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|4
|[[#Enable VDSL Interface|Enable VDSL]]
|'''Advanced Setup'''
'''→ Layers2 Interface'''

'''→ PTM Interface'''
|Remove '''ptm0''' with '''Path0'''
Add PTM: DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|6
|Configure ADSL
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''atm0/(4_0_35)''' Bridge (br_4_0_35)
|-
|7
|Configure VDSL
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''ptm0/(4_1_1)''' Bridge(br_4_1_1.35)
* 802.1P Priority:'''1'''

* 802.1Q VLAN:'''35'''
|-
|9
|WiFi
|'''Wireless'''
|Disable Wireless
|-
|11
|[[SmartRG SR506N Configuration#Admin Password|Admin Password]]
|'''Management'''
'''→ Access Controls'''

'''→ Passwords'''
|
* Username: '''admin'''

* Old Password: admin (or whatever you set it to)
* New Password: your DSL password
|-
|12
|[[#Disable Support|Disable Support]]
|'''Management'''
'''→ Accounts'''

'''→ Access Controls'''
|'''Delete/Modify Account'''
* Select '''Support''' role

* '''Disable'''
* '''Update''' (at bottom)
|-
|13
|[[#Remote Access|Remote Access]]
|'''Management'''

'''→ Management Server'''
|
* TR-069 Client: '''Disable'''
* ACS URL: '''https://acs.ncf.ca'''
|-
|14
|[[#System Log|System Log]]
|'''Management'''

'''→ System Log'''
|Configure System Log
* System Log:'''Enable'''
* Log Level: '''Debugging'''
* Display Level: '''Error'''
* Mode: '''Local'''
|-
|16
|[[#Backup Settings|Backup Settings]]
|'''Management'''

'''→ Settings'''

'''→ Backup'''
|
* '''Backup''' '''Running Settings'''
* Save backup file to computer
|}