WiFi Changes for Hitron Modems - Revision history

Gc469 at 15:10, 19 October 2021

2021-10-19T15:10:59Z

← Older revision		Revision as of 15:10, 19 October 2021
Line 9:		Line 9:
	* Username: '''cusadmin'''		* Username: '''cusadmin'''
	* Password: WiFi password used during initial setup		* Password: WiFi password used during initial setup
	[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|none\|thumb\|540x540px\|Hitron modem Login Page\|link=https://www.ncf.ca/ncf/support/wiki/File:Hitron WiFi name change.png]]		[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|none\|thumb\|540x540px\|Hitron modem Login Page\|link='https://www.ncf.ca/ncf/support/wiki/File:Hitron WiFi name change.png']]

	4. On the top menu bar, select 'Wireless'		4. On the top menu bar, select 'Wireless'
Line 15:		Line 15:

	5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings		5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings
	[[File:Hitron WiFi 2.4Ghz.png\|alt=Hitron WiFi 2.4Ghz\|none\|thumb\|~~540x540px\|~~]]		[[File:Hitron WiFi 2.4Ghz.png\|alt=Hitron WiFi 2.4Ghz\|none\|thumb\|755x755px]]

	6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.		6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.
	[[File:Hitron WiFi 5Ghz.png\|alt=Hitron WiFi 5Ghz\|none\|thumb\|~~540x540px~~\|]]		[[File:Hitron WiFi 5Ghz.png\|alt=Hitron WiFi 5Ghz\|none\|thumb\|755x755px\|]]

	You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.		You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.

Gc469: /* Changing WiFi Name */

2021-10-19T15:08:15Z

Changing WiFi Name

← Older revision		Revision as of 15:08, 19 October 2021
Line 1:		Line 1:
	== Changing WiFi Name ==		== Changing 5Ghz band WiFi Name ==
	1 a. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the Hitron modem.		1 a. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the Hitron modem.

Gc469 at 21:00, 18 October 2021

2021-10-18T21:00:20Z

← Older revision		Revision as of 21:00, 18 October 2021
Line 9:		Line 9:
	* Username: '''cusadmin'''		* Username: '''cusadmin'''
	* Password: WiFi password used during initial setup		* Password: WiFi password used during initial setup
	[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|thumb]]		[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|none\|thumb\|540x540px\|Hitron modem Login Page\|link=https://www.ncf.ca/ncf/support/wiki/File:Hitron WiFi name change.png]]

	4. On the top menu bar, select 'Wireless'		4. On the top menu bar, select 'Wireless'
	[[File:Hitron WiFi Toolbar.png\|alt=Hitron WiFi toolbar\|thumb]]		[[File:Hitron WiFi Toolbar.png\|alt=Hitron WiFi toolbar\|none\|thumb\|500x1200px\|]]

	5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings		5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings
	[[File:Hitron WiFi 2.4Ghz.png\|alt=Hitron WiFi 2.4Ghz\|thumb]]		[[File:Hitron WiFi 2.4Ghz.png\|alt=Hitron WiFi 2.4Ghz\|none\|thumb\|540x540px\|]]

	6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.		6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.
	[[File:Hitron WiFi 5Ghz.png\|alt=Hitron WiFi 5Ghz\|thumb]]		[[File:Hitron WiFi 5Ghz.png\|alt=Hitron WiFi 5Ghz\|none\|thumb\|540x540px\|]]

	You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.		You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.

Gc469 at 20:54, 18 October 2021

2021-10-18T20:54:35Z

← Older revision		Revision as of 20:54, 18 October 2021
Line 5:		Line 5:

	2. Open an Internet browser on your computer and connect to the modem by typing [http://192.168.0.1 192.168.0.1] in the address bar.		2. Open an Internet browser on your computer and connect to the modem by typing [http://192.168.0.1 192.168.0.1] in the address bar.
	~~[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|thumb]]~~

	3. Enter the username and password for the login page.		3. Enter the username and password for the login page.
	* Username: '''cusadmin'''		* Username: '''cusadmin'''
	* Password: WiFi password used during initial setup		* Password: WiFi password used during initial setup
			[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|thumb]]

	4. On the top menu bar, select 'Wireless'		4. On the top menu bar, select 'Wireless'

Gc469: Added pictures

2021-10-18T20:53:59Z

Added pictures

← Older revision		Revision as of 20:53, 18 October 2021
Line 1:		Line 1:
			== Changing WiFi Name ==
	1 a. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the Hitron modem.		1 a. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the Hitron modem.

Line 4:		Line 5:

	2. Open an Internet browser on your computer and connect to the modem by typing [http://192.168.0.1 192.168.0.1] in the address bar.		2. Open an Internet browser on your computer and connect to the modem by typing [http://192.168.0.1 192.168.0.1] in the address bar.
			[[File:Hitron WiFi name change.png\|alt=Hitron Login Screen\|thumb]]

	3. Enter the username and password for the login page.		3. Enter the username and password for the login page.
Line 10:		Line 12:

	4. On the top menu bar, select 'Wireless'		4. On the top menu bar, select 'Wireless'
			[[File:Hitron WiFi Toolbar.png\|alt=Hitron WiFi toolbar\|thumb]]

	5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings		5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings
			[[File:Hitron WiFi 2.4Ghz.png\|alt=Hitron WiFi 2.4Ghz\|thumb]]

	6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.		6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.
			[[File:Hitron WiFi 5Ghz.png\|alt=Hitron WiFi 5Ghz\|thumb]]

	You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.		You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.

Gc469: Gc469 moved page Changing WiFi Channels on Hitron modems to WiFi Changes for Hitron Modems: change wifi name and channel

2021-10-18T20:40:32Z

Gc469 moved page Changing WiFi Channels on Hitron modems to WiFi Changes for Hitron Modems: change wifi name and channel

← Older revision	Revision as of 20:40, 18 October 2021
(No difference)

Gc469: Initial update for Hitron Modems

2021-10-18T20:37:39Z

Initial update for Hitron Modems

New page

1 a. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the Hitron modem.

1 b. Connect to the Wireless Network you set up initially for your Hitron Modem.

2. Open an Internet browser on your computer and connect to the modem by typing [http://192.168.0.1 192.168.0.1] in the address bar.

3. Enter the username and password for the login page.
* Username: '''cusadmin'''
* Password: WiFi password used during initial setup

4. On the top menu bar, select 'Wireless'

5. On the 2.4 Ghz tab, ensure WPS is OFF and the Auth mode is WPA2-PSK. Save your settings

6. On the 5Ghz tab, change the Network Name (SSID) to be different from the 2.4Ghz name. We recommend adding ' 5Ghz' to the end. Save your settings.

You will then need to add the 5Ghz band to your devices, and if you wish to use it exclusively, you will need to remove or 'Forget' the 2.4Ghz band.