Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Hitron CODA-45

From Support
Revision as of 20:28, 26 September 2021 by Xx176 (talk | contribs) (→‎Images)
Jump to navigation Jump to search

Network Eligibility

The Hitron CODA-45 has been certified by the following cable network vendors for operation on their infrastructure:

  • Rogers (Ontario)
  • Cogeco (Ontario and Quebec)

Firmware

Current certified firmware version: 7.2.4.3.1b3 (on the Rogers cable network) Current certified firmware version: 7.1.1.1.2b1 (on the Rogers cable network)

Cable network operators control what cable modems and firmware versions can be used on their networks. Operators run all cable devices and firmware versions through their own testing process, after which the device and firmware are certified for use on the cable network. After the testing and approval process of a new version of firmware for a cable device, cable network operators may then automatically upgrade all cable modems connected on their network with the latest certified firmware.

NCF does not have access to firmware that it can provide to members.

Accessing the Configuration

You must complete the Quick Setup for the Hitron CODA-45 before you can access its Configuration. If you have not completed the Quick Setup, you will be directed to it when attempting the follow the steps below.

To access the Hitron CODA-45 Configuration:

  1. Connect a device to the modem by plugging an ethernet cable from your device into one of the LAN ports on the back of the modem.
  2. Open up a web browser on your connected device.
  3. Enter 192.168.0.1 in your web browser's URL bar.
  4. A Login screen for the Hitron CODA-45 will appear. The default username and password are case-sensitive, and are:
    • Username: cusadmin
    • Password: password
  5. Select Login. The Status Overview screen will display.

Modes of Operation

Functions only as a modem. A separate router is required to provide Wi-Fi.

Factory Reset

When you reset the CODA-45 to its factory default settings, all user-configured settings are lost, and the modem is returned to its initial configuration state.

To factory reset the CODA-45:

  • Using a pin or pencil tip, press and hold the RESET button at the back of the modem for more than 5 seconds.

The CODA-45 will turn off and on again, and load with its factory default settings.

Modem Lights

The operational status of the Hitron CODA-45 is indicated by lights (LEDs). These LEDs indicate power, downstream connection (DS), upstream connection (US), internet connectivity (@), and active LAN ports (LAN)

Information is communicated by whether the lights are green, blue, off, or flashing.

Here's a summary of how to read the lights on the Hitron CODA-45:

Hitron CODA-45 Lights Chart.png

Images

See Also