Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Hitron CODA-4680"

From Support
Jump to navigation Jump to search
m
Line 51: Line 51:
{{Template:Back_to_the_Top}}
{{Template:Back_to_the_Top}}
<gallery mode="slideshow">
<gallery mode="slideshow">
File:SR516ac-front.png|SmartRG SR516ac - Front
File:Hitron coda-4680 front.jpg|Hitron CODA-4680: Lights
File:SR516ac-back.png|SmartRG SR516ac - Back
File:Hitron coda-4680 rear.jpg|Hitron CODA-4680: Back
File:SR516ac-left.png|SmartRG SR516ac - Left Side
File:SR516ac-angled.png|SmartRG SR516ac - Angled
File:SR516ac-angled.png|SmartRG SR516ac - Angled
File:Hitron CODA-4680 Diagram.png|Hitron CODA-4680: Diagram
File:SR516ac-setup.png|SmartRG SR516ac Setup Diagram
File:SR516ac-setup.png|SmartRG SR516ac Setup Diagram
</gallery>
</gallery>

Revision as of 19:50, 26 September 2021

Hitron CODA-4680
 Hitron CODA-4680 Front Hitron CODA-4680 Rear

Sold from April 2021

Network Eligibility

The Hitron CODA-4680 available from NCF has been certified by the following cable network vendors for operation on their infrastructure:

  • Rogers (Ontario)

Firmware

Current certified firmware version: 7.1.1.2.2b9 (on the Rogers cable network)

Cable network operators control what cable modems and firmware versions can be used on their networks. Operators run all cable devices and firmware versions through their own testing process, after which the device and firmware are certified for use on the cable network. After the testing and approval process of a new version of firmware for a cable device, cable network operators may then automatically upgrade all cable modems connected on their network with the latest certified firmware.

NCF does not have access to firmware that it can provide to members.

Quick Setup

Accessing the Hitron CODA-4680

You must complete the Quick Setup for the Hitron CODA-4680 before you can access its Configuration. If you have not completed the Quick Setup, you will be directed to it when attempting the follow the steps below.

To access the Hitron CODA-4680 Configuration:

  1. Ensure you have successfully completed the Quick Setup steps for the modem.
  2. Connect a device to the modem by plugging an ethernet cable from your device into one of the LAN ports on the back of the modem, or by connecting your device to the modem over Wi-Fi.
  3. Open up a web browser on your connected device.
  4. Enter 192.168.0.1 in your web browser's URL bar.
  5. A Login screen for the Hitron CODA-4680 will appear. Enter the following:
    • Username: cusadmin
    • Password: <the Wi-Fi network password that you configured in the Quick Setup>
  6. Select Login.

Modes of Operation

  1. Routed - Functions as both a modem and Wi-Fi router, which is recommended for most members. Another router can be added to extend the network, but each network must use a different subnet.
  2. Bridge - (Advanced) Functions only as a modem. A separate router is required to provide Wi-Fi.

Factory Reset

When you reset the CODA-4680 to its factory default settings, all user-configured settings are lost, and the modem is returned to its initial configuration state.

To factory reset the CODA-4680:

  1. Using a pin or pencil tip, press and hold the RESET button at the back of the modem for 10 seconds, or
  2. Login to the CODA-4680 Configuration. Under Admin, choose Device Reset tab, and select the Factory Reset button.

The CODA-4680 will turn off and on again, and load with its factory default settings.

Modem Lights

The SmartRG SR516ac modem router supports both ADSL and VDSL, and switches automatically to match the line it is connected to.

Images

See Also