Ovislink OV804WVA Routed Configuration

with WiFi

NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem.

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
2. Call 613-721-1773 x0 to book a Modem Appointment.

Steps to Configure OvisLink for Routed Operation

	Steps	Menu Navigation	Parameters
1	Log into Modem	http://192.168.1.1	User Name: admin Password: admin
2	WAN Cleanup	Advanced Setup → WAN Service	Remove everything from the WAN Service Table
3	Enable ADSL	Advanced Setup → Layer2 Interface → ATM Interface	Remove atm0 from the table Add ATM: vpi:0 vci:35 DSL Latency: FAST and INTERLEAVED
4	Enable VDSL	Advanced Setup → Layer2 Interface → PTM Interface	Remove ptm0 from the table Add PTM: DSL Latency: FAST and INTERLEAVED
5	Configure ADSL	Advanced Setup → WAN Service	Add atm0/(4_0_35) PPPoE (pppoe_4_0_35) Network Protocol Selection: IPv4 and IPv6 (Dual Stack) PPPoE username: your DSL username (format: aa000@ncf.ca PPPoE password: your DSL password Enable Firewall Enable NAT Disable SIP
6	Configure VDSL	Advanced Setup → WAN Service	Add ptm0/(4_1_1) PPPoE(pppoe_4_1_1.35) 802.1P Priority:1 802.1Q VLAN:35 Network Protocol Selection: IPv4 and IPv6 (Dual Stack) PPPoE username: your DSL username (format: aa000@ncf.ca) PPPoE password: your DSL password Enable Firewall Enable NAT Disable SIP
7	UPnP	Advanced Setup → UPnP	Disable uPnP
8	WiFi 5GHz Name	Wireless → 5 GHz Band	SSID (WiFi Name) to format NCF_0000
9	WiFi 5 GHz Security	Wireless → 5 GHz Band → Security	Disable WPS Network Authentication to WPA2-PSK WPA Passphrase : your DSL password WPA Encryption : AES
10	WiFi 2.4 GHz Name	Wireless → 2.4 GHz Band	SSID (WiFi Name) to format NCF_0000
11	WiFi 2.4 GHz Security	Wireless → 2.4 GHz Band → Security	Disable WPS Network Authentication to WPA2-PSK WPA Passphrase : your DSL password WPA Encryption : AES
12	Admin Password	Management → Access Controls → Passwords	Username: admin Old Password: admin (or whatever you set it to) New Password: your DSL password
13	Remote Access	Management → TR-069 Client	Disable Inform ACS URL: https://acs.ncf.ca
14	System Log	Management → System Log → Configure System Log	Configuration: Log:Enable Log Level: Debugging Display Level: Error Mode: Local
15	Internet Time	Management → Internet Time	Time settings: Automatically synchronize with Internet time servers:Enable First NTP time server:Other: time.nrc.ca Time Zone: (GMT - 5:00) Eastern Time
16	Backup Settings	Management → Settings → Backup	Settings -Backup Backup Settings

with separate WiFi Router

NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem:

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca. You may need an alternate means of accessing the internet to download the configuration file.
2. Call 613-721-1773 x0 to book a Modem Appointment.

Configure your modem for Routed Operation

If you have a router, we recommend the following configuration steps:

1. Follow the configuration steps outline for Routed Operation with WiFi and make the following changes:
   • Under Wireless, Uncheck the Enable Wireless Option,
   • Click Apply/Save

Router configuration

2. On your router, set the Connection Mode or Type to Automatic IP, Automatic DHCP or Dynamic IP mode

See Also

• Modem configuration - Instructions for all NCF modems
• Ovislink OV804WVA Changing WiFi Name or Password
• Ovislink OV804WVA Changing WiFi Channels