Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Router Configuration"

From Support
Jump to navigation Jump to search
Line 5: Line 5:
When a separate router is used with your NCF modem, the typical setup is to put the modem into "Bridge" mode and have the router do the user authentication.  The name of that authentication setting is called "PPPoE."   
When a separate router is used with your NCF modem, the typical setup is to put the modem into "Bridge" mode and have the router do the user authentication.  The name of that authentication setting is called "PPPoE."   


You should be able to configure your router by simply connecting the unit to your computer with an ethernet cable, and accessing the built-in configuration page. The address at which your browser should be pointed is often written on the bottom of the unit, or in the router's user manual.
You should be able to configure your router by simply connecting the unit to your computer with an ethernet cable, and accessing the built-in configuration page though you web browser. The address for the user interface, to be entered in your browser's location bar, is often written on the bottom of the unit, or in the router's user manual.


==Example Configuration Steps==
==Example Configuration Steps==

Revision as of 13:58, 31 August 2012

This page deals with configuring a wifi router to work with a DSL modem.

Router Configuration

When a separate router is used with your NCF modem, the typical setup is to put the modem into "Bridge" mode and have the router do the user authentication. The name of that authentication setting is called "PPPoE."

You should be able to configure your router by simply connecting the unit to your computer with an ethernet cable, and accessing the built-in configuration page though you web browser. The address for the user interface, to be entered in your browser's location bar, is often written on the bottom of the unit, or in the router's user manual.

Example Configuration Steps

See also