Difference between revisions of "VOIP"
(initial entry) |
(→Using VOIP with a TP-Link modem: copyedit) |
||
| Line 2: | Line 2: | ||
==Using VOIP with a TP-Link modem== | ==Using VOIP with a TP-Link modem== | ||
If you are using VOIP with a TP-Link modem you may experience problems such as voice | If you are using VOIP with a TP-Link modem you may experience problems such as voice being received but not transmitted after a connection is established. This may be addressed with a command line setting change in the modem to enable this via [http://en.wikipedia.org/wiki/Telnet telnet]. | ||
ip nat service sip sw off | ip nat service sip sw off | ||
Revision as of 13:48, 2 November 2012
VOIP means Voice Over Internet Protocol, where your telephone service is provided via the internet.
Using VOIP with a TP-Link modem
If you are using VOIP with a TP-Link modem you may experience problems such as voice being received but not transmitted after a connection is established. This may be addressed with a command line setting change in the modem to enable this via telnet.
ip nat service sip sw off
If the command is successful the following line will be returned:
nat sip v2 switch off
Accessing Telnet
Linux
On Linux operating systems you can access telnet by opening a terminal and typing in "telnet" at the prompt.
Windows
On Windows XP and Vista operating systems telnet can be accesses by using the run command and entering telnet.
Windows 7 and 8 does not support telnet out of the box, but is can be run by installing and using the PuTTY free software application.