View source for Ovislink OV501GF Routed Configuration

'''Note''': You might need to set a static IPv4 address manually on your computer with the gateway IP set to [https://192.168.1.1 http://192.168.1.1] to log in to the modem. 


'''NCF Support''' is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem.

# You can request a custom configuration file for your NCF DSL connection from [mailto:support@ncf.ca support@ncf.ca].
# Call [Tel:613-721-1773 613-721-1773] x0 to book a Modem Appointment.

{| class="wikitable"
|+Steps to Configure OvisLink for Routed Operation 
!
!Steps
!Menu Navigation
!Parameters
|-
|1
|Log into Modem 
|<nowiki>http://192.168.1.1</nowiki> 
|User Name: '''admin'''
Password: '''admin'''
|-
|2
|WAN Cleanup 
|'''Advanced Setup'''
'''→ WAN Service'''
|Remove everything from the '''WAN''' Service Table 
|-
|3
|Enable ADSL 
|'''Advanced Setup'''
'''→ Layer2 Interface'''

'''→ ATM Interface'''
|Remove '''atm0''' from the table
Add ATM: vpi:'''0''' vci:'''35''' DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|4
|Enable VDSL 
|'''Advanced Setup'''
'''→ Layer2 Interface'''

'''→ PTM Interface'''
|Remove '''ptm0''' from the table
Add PTM: DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|5
|Configure ADSL
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''atm0/(4_0_35)''' PPPoE (pppoe_4_0_35)

* Network Protocol Selection:  '''IPv4 and IPv6 (Dual Stack)'''
* PPPoE username: your DSL username (format: aa000@ncf.ca
* PPPoE password: your DSL password
|-
|6
|Configure VDSL 
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''ptm0/(4_1_1)''' PPPoE(pppoe_4_1_1.35)

* 802.1P Priority:'''1'''
* 802.1Q VLAN:'''35'''
* Network Protocol Selection:  '''IPv4 and IPv6 (Dual Stack)'''
* PPPoE username: your DSL username (format: aa000@ncf.ca)
* PPPoE password: your DSL password
|-
|7
|UPnP 
|'''Advanced Setup'''
'''→ UPnP'''
|Disable '''uPnP'''
|-
|8
|Admin Password 
|'''Management'''
'''→ Access Controls'''

'''→ Passwords'''
|
* Username: '''admin'''

* Old Password: admin (or whatever you set it to)
* New Password: your DSL password
|-
|9
|Remote Access 
|'''Management'''
'''→ TR-069 Client'''
|
* Disable '''Inform'''

* ACS URL: https://acs.ncf.ca
|-
|10
|System Log 
|'''Management'''
'''→ System Log'''

'''→ Configure System Log'''
|Configuration:

* Log:'''Enable'''
* Log Level: '''Debugging'''
* Display Level: '''Error'''
* Mode: '''Local'''
|-
|11
|Internet Time 
|'''Management'''
'''→ Internet Time'''
|Time settings:

* Automatically synchronize with Internet time servers:'''Enable'''
* First NTP time server:Other: '''time.nrc.ca'''
* Time Zone: '''(GMT - 5:00) Eastern Time'''
|-
|12
|Backup Settings 
|'''Management'''
'''→ Settings'''

'''→ Backup'''
|Settings -Backup

* Backup Settings
|}

== See Also ==
{{Template:Back_to_the_Top}}
[[Modem Configuration|Modem configuration]] - Instructions for all NCF modems