Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Cable test page"

From Support
Jump to navigation Jump to search
Line 27: Line 27:




[[File:Cable factory.png|left|thumb|918x918px]]
[[File:Cable factory.png|left|thumb|918x918px|Factory Reset]]
 
 
 




Line 50: Line 53:


[[File:Hard reset.png|left|thumb|448x448px|Factory Rest Button]]
[[File:Hard reset.png|left|thumb|448x448px|Factory Rest Button]]





Revision as of 16:18, 24 May 2024

Common fixes for Cable modems

If the modem's @ light is on but there is no internet, try power cycling it.

  • To perform a power cycle, unplug your modem from the wall for a duration of 30 seconds.

In the event that the @ light is off and the ⬇️ downstream light or ⬆️ upstream light is flashing try:

  • Disconnect and reconnect the coaxial cable at the back, making sure it is securely attached.

If the first two methods do not work, perform a factory reset.


Factory Reset

When you perform a factory reset, the CODA-4680 returns to default settings, losing all user-configured settings and returning the modem to its initial configuration state. Method one

Method One

Your device will need to be connected to your modem by WiFi or an Ethernet cable plugged into one of the CODA-4680 modem's LAN ports.

CODA-4680-Login
  1. Open a web browser Chrome, Firefox of Safari and enter http://192.168.0.1 into the address bar then press enter.
  2. A login screen for the Hitron CODA-4680 will appear. The default username and password are case-sensitive.
    • Username: cusadmin
    • Password: <the Wi-Fi network password that you configured in the Quick Setup>
  3. Press the Login
    4. Select Admin, choose Device Reset tab, and select the Factory Reset button.


Factory Reset










Method Two


Using a pin or pencil tip, press and hold the RESET button at the back of the modem for at least 30 seconds

Factory Rest Button














Modem Logs