Difference between revisions of "Modem Manuals"
| Line 59: | Line 59: | ||
* [http://www.tp-link.com/resources/document/datasheet/TD-W8950ND_ds.zip Datasheet] | * [http://www.tp-link.com/resources/document/datasheet/TD-W8950ND_ds.zip Datasheet] | ||
* [http://www.tp-link.com/en/download/TD-W8950ND.html#Firmware 8950 Firmware] | * [http://www.tp-link.com/en/download/TD-W8950ND.html#Firmware 8950 Firmware] | ||
* [http://www.tp-link.com/resources/simulator/TD-W8901N_V3_Emulator/index.htm 8950 Emulator] | |||
* [http://www.tp-link.com/en/download/TD-W8951ND_V5.html#FAQs General TP-Link FAQ] | * [http://www.tp-link.com/en/download/TD-W8951ND_V5.html#FAQs General TP-Link FAQ] | ||
</div> | </div> | ||
Revision as of 15:26, 17 August 2016
The manual for your NCF-supplied DSL modem can be found at the links below.
For instructions on how to configure these modems, see Modem Configuration (DSL)
TP-Link Modems
9970, four-port ethernet + "N" wireless ADSL/VDSL
8816, single ethernet port ADSL
8951ND, four-port ethernet + "N" wireless ADSL
8950ND, four-port ethernet + "N" wireless ADSL
8901G, four-port ethernet + "G" wireless ADSL
8616, one-port modem only
Very rarely encountered. Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. User must assign one manually. The modem manual details the process well in Section 3.1. NOTE: This does not supply the user with a Static IP address.
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.
SmartRG Modem
SR505N, four-port ethernet + "N" wireless VDSL
- sold from September 2014 to January 2016
- home page
- data sheet
- modem manual
- NCF modem instruction sheet
- Modem Configuration (DSL) SmartRG SR505N
Sagemcom Modem
2864, four-port ethernet + "N" wireless VDSL
- sold from November 2013 to August 2014
- There do not seem to be any manuals available from the manufacturer for this modem
- Modem Configuration (DSL) Sagemcom 2864
- Sagemcom 2864 set-up PDF
Thomson Gateways
NCF sold Thomson modems prior to December 2011. Before 2010, Thomson Gateway (TG) DSL modems ('gateways') were called 'SpeedTouch' (ST).
TG585 DSL modem version 8, four-port ethernet + wireless ADSL
- sold from summer of 2011 until December 2011
- Setup and User Guide
- Guide d'installation et de l'utilisateur
- Datasheet
TG585 DSL modem version 7, four-port ethernet + wireless ADSL
- sold from late 2009 until spring 2011
- Setup and User Guide
- Guide d'installation et de l'utilisateur
- Datasheet
ST585 DSL modem version 6, four-port ethernet + wireless ADSL
- sold until approx late 2009
- Setup and User Guide
- Guide d'installation et de l'utilisateur
ST516 modem version 6, single ethernet port ADSL
- sold until December 2011
- Setup and User Guide
- Guide d'installation et de l'utilisateur
- Datasheet