Difference between revisions of "Line Stats"
| Line 149: | Line 149: | ||
| '''Line Profile Name:''' | | '''Line Profile Name:''' | ||
| Example: '''al1_d6016-384_u800-256''' | | Example: '''al1_d6016-384_u800-256''' | ||
| Last State Change: | | '''Last State Change:''' | ||
| '''mm/dd hh:mm:ss'''<br/>(last time the Line Profile was provided) | | '''mm/dd hh:mm:ss'''<br/>(last time the Line Profile was provided) | ||
|- | |- | ||
|- style="vertical-align: top;" | |- style="vertical-align: top;" | ||
| '''DLM State:'''<br/>(Dynamic Line Manager, a process on the DSLAM) | | '''DLM State:'''<br/>(Dynamic Line Manager, <br>a process on the DSLAM) | ||
| '''Active or OPERATIONS''' (preferred)<br> | | '''Active or OPERATIONS''' (preferred)<br> | ||
'''PENDING''' (new line activation)<br> | '''PENDING''' (new line activation)<br> | ||
'''Disabled''' (manual handling)<br> | '''Disabled''' (manual handling)<br> | ||
'''Failed''' (DLM can’t set a Line Profile)<br> | '''Failed''' (DLM can’t set a Line Profile)<br> | ||
'''Unstable''' (DLM is unable to set a | '''Unstable''' (DLM is unable to set a Line Profile) | ||
| '''Equipment Type:''' (DSLAM) | | '''Equipment Type:''' <br>(DSLAM) | ||
|Example: '''7330_REM'''<br/>There are many types of DSLAMs deployed by Bell in the field.<br> The above was built by Newbridge/Alcatel-Lucent, today's Nokia | |Example: '''7330_REM'''<br/>There are many types of DSLAMs deployed by Bell in the field.<br> The above was built by Newbridge/Alcatel-Lucent, today's Nokia | ||
|- | |- | ||
| Line 178: | Line 178: | ||
| '''UpStream'''<br/>(upload) | | '''UpStream'''<br/>(upload) | ||
| Example: '''797.0''' | | Example: '''797.0''' | ||
! rowspan="2" | Lower is better<br> < 85% is the preferred range | ! rowspan="2" | Lower is better<br><br> < 85% is the preferred range | ||
! rowspan="2" | Higher is better<br/> | ! rowspan="2" | Higher is better<br/> | ||
> 20 dB: Excellent<br/> | > 20 dB: Excellent<br/> | ||
| Line 184: | Line 184: | ||
10 - 6 dB: Fair<br/> | 10 - 6 dB: Fair<br/> | ||
< 6 dB: Poor | < 6 dB: Poor | ||
! rowspan="2" | Lower is better<br>Tied to RCO, SNR & Attenuation | ! rowspan="2" | Lower is better<br><br>Tied to RCO, SNR & Attenuation | ||
! rowspan="2" | Lower is better<br/> | ! rowspan="2" | Lower is better<br/> | ||
< 40 dB: Excellent<br/> | < 40 dB: Excellent<br/> | ||
Revision as of 10:54, 7 October 2017
Your DSL modem continuously monitors the quality of your DSL service. You can obtain line statistical information from your modem to assess the quality of your line and service.
Bell is responsible for the quality of your line and it is worth noting that most of your monthly payment to NCF goes to Bell to provide DSL service on your line.
How to obtain line stats from your modem
SpeedTouch 585 or 516v6
- Log into the web interface of your modem (how to log in)
- In the left column, click on 'Broadband Connection'
- In the left column, click on 'DSL Connection'
- In the top-right area, click on 'Details'
Depending on your modem model and configuration, the numbers may be displayed with commas and periods in the European manner, which is the reverse of what is common in North America. For example: 1,000.12 for 'one thousand decimal 12' may be displayed as '1.000,12'.
SpeedTouch 516v5
- Log into the web interface of your modem (how to log in)
- In the left column, click 'Advanced'
- Below that click 'Diagnostics'
- Above click the + sign beside 'Expand All'
- Scroll down to the section 'Wan' ... 'Dsl'
TP-Link 8816, 8901G or 8951ND
These models of TP-Link modems all have similar interfaces:
- Log into the web interface of your modem (how to log in)
- Click on 'Status'
- Click on 'Device Info'
TP-Link 8950ND
- Log into the web interface of your modem (how to log in)
- Click on 'Device info'
- Click on 'Statistics'
- Click on 'ADSL'
SmartRG 505n
- Log into the web interface of your modem (how to log in)
- Click on 'Device info'
- Click on 'Statistics'
- Click on 'xDSL'
How to interpret line stats
Speed (Rate)
It is expected that download speed (measured as Mbps, Mb/s, kbps, kb/s) to be faster than upload speed. You can confirm this number by doing a speed test.
Attenuation
Attenuation is a measure (in dB) of how far (cable length, not line-of-sight) you are from the Bell equipment (DSLAM). Note that Lower is better as it indicates a shorter cable length.
| Attenuation | Rating |
|---|---|
| 0 - 40 | Excellent |
| 40 - 50 | Good |
| 50 - 60 | Fair |
| >60 | Poor |
Signal-to-Noise Ratio (SNR or Noise Margin)
Signal-to-Noise Ratio is a measure (in dB) of how much electrical noise exists on your line. Too much noise can affect the DSL signal. Higher is better as it means you have more signal than noise.
| SNR | Rating |
|---|---|
| >20 | Excellent |
| 20-10 | Good |
| 10-6 | Fair |
| 6-0 | Poor |
Errors
The error figures are an indication of how many packets had to be re-transmitted because they contained an error and may be caused by line noise. Error counts are cumulative since the time DSL sync was last obtained. To reset the error counts, do a software restart of your modem, or power cycle your modem, or disconnect your DSL line for a minute or two.
The significance of error counts is unclear and may be meaningless. Some modems may misreport errors and even with errors, your service may be fine.
Line Profile stats reported by Bell
You can see your stats as seen by NCF here. Note the date on that page that says when they were collected.
Line Profile stats reported by Bell
| Line Operational Status | 613-xxx-xxxx (DSL phone number, may or not be your Bell #) | |||||
|---|---|---|---|---|---|---|
| Line Status: | In Service (preferred) Out of Service (trouble!) |
UpTime: | (not a useful field, usually not populated by Bell) | |||
| Line Profile Name: | Example: al1_d6016-384_u800-256 | Last State Change: | mm/dd hh:mm:ss (last time the Line Profile was provided) | |||
| DLM State: (Dynamic Line Manager, a process on the DSLAM) |
Active or OPERATIONS (preferred) PENDING (new line activation) |
Equipment Type: (DSLAM) |
Example: 7330_REM There are many types of DSLAMs deployed by Bell in the field. The above was built by Newbridge/Alcatel-Lucent, today's Nokia | |||
| Operational Status | Speed (Kbs) | Relative Capacity Occupation (%) | Noise Margin (0..31 dB) | Signal Power (0..20 dBm) | Attenuation (0..60 dB) | Block count |
| UpStream (upload) |
Example: 797.0 | Lower is better < 85% is the preferred range |
Higher is better > 20 dB: Excellent |
Lower is better Tied to RCO, SNR & Attenuation |
Lower is better < 40 dB: Excellent |
Some number that is not very useful |
|---|---|---|---|---|---|---|
| DownStream (download) |
Example: 6014.0 |