Difference between revisions of "Changing WiFi Channels on SmartRG modems"
m |
m |
||
| Line 22: | Line 22: | ||
* '''Channel''': Switch from '''Auto''' to Least Congested Channel (Usually 3,4, 8 or 9) | * '''Channel''': Switch from '''Auto''' to Least Congested Channel (Usually 3,4, 8 or 9) | ||
|} | |} | ||
1. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the SmartRG | 1. Using an Ethernet cable plug into one of the yellow '''LAN''' Ports at the back of the SmartRG modem. Connect to the Network '''NCF_XXXX''' on your computer. Your computer should indicate an Ethernet connection as opposed to a wireless one.<gallery caption="SmartRG Modem LAN Ports in Yellow" widths="150" heights="150" perrow="3"> | ||
File:Sr505n back.jpg|Back of SmartRG SR505n | File:Sr505n back.jpg|Back of SmartRG SR505n | ||
File:Sr506n-back.PNG|Back of SmartRG SR506n | File:Sr506n-back.PNG|Back of SmartRG SR506n | ||
| Line 31: | Line 31: | ||
* Username: '''admin''' | * Username: '''admin''' | ||
* Password: Your DSL password (Default is '''password''', if you reset modem) | * Password: Your DSL password (Default is '''password''', if you reset modem) | ||
[[File:SR505n-Login Page.png|alt=SmartRG SR505n Login Page|none|thumb|540x540px|SmartRG | [[File:SR505n-Login Page.png|alt=SmartRG SR505n Login Page|none|thumb|540x540px|SmartRG modem Login Page|link=https://www.ncf.ca/ncf/support/wiki/File:SR505n-Login_Page.png]] | ||
4. From the '''Device Info''' page, navigate to '''Wireless''' menu option on the left. | 4. From the '''Device Info''' page, navigate to '''Wireless''' menu option on the left. | ||
Revision as of 11:17, 13 February 2019
| Summary of Configuration Information and Changes | |
| Modem Login Page:
Modem Administrator User Name: Modem Administrator Password: |
192.168.1.1
admin DSL password (Default is password, if you reset modem) |
| Where to go in Menu: | Wireless→Advanced or
Wireless→2.4 GHz band→ Advanced |
| Changes: |
|
1. Using an Ethernet cable plug into one of the yellow LAN Ports at the back of the SmartRG modem. Connect to the Network NCF_XXXX on your computer. Your computer should indicate an Ethernet connection as opposed to a wireless one.
- SmartRG Modem LAN Ports in Yellow
Back of SmartRG SR505n
Back of SmartRG SR506n
Back of SmartRG SR516ac
2. Open an Internet browser on your computer and connect to the modem by typing 192.168.1.1 in the address bar.
3. Click on the Manage Gateway(Advanced)” Log in to the Administrative Account:
- Username: admin
- Password: Your DSL password (Default is password, if you reset modem)
4. From the Device Info page, navigate to Wireless menu option on the left.
5. Click on the Advanced submenu link on the left hand side, under the Wireless Menu (or under Wireless → 2.4 GHz Band Menu)
6. On the Wireless-- Advanced settings page, make the following changes:
- Channel: Change from Auto to channel with the least interference as determined by your wireless interference tests. Try 3,4, 8 or 9
7. Click Apply/Save at the bottom of the page.
Notes:
- Wireless channels shouldn't have to be changed often (more than once every 6-12 months). If you find yourself making these changes too frequently, you may have to invest in a mid to high end router with additional channels on the 5Ghz frequency. Contact support@ncf.ca for recommendations if needed.
See Also
- Modem Configuration - for a complete list of instructions for all NCF modems
- About SmartRG modem lights
- SmartRG SR505N modem manual
- NCF SmartRG SR505N modem instruction sheet
- Dynamic DNS
- Port forwarding with the SmartRG SR505N
External links
- Wireless Spectrum Conundrum Basic Wireless Spectrum Information, by Lou Frenzel, Electronic Design
- 4 Reasons Why Your Wi-Fi Is So Slow (And How to Fix Them) by James Frew, Make Use Of
- How to Stay Safe When Using Public Wi-Fi, by Steve Sande, Rocketyard
- How easy is it to capture data on public free Wi-Fi? by Gary Sims, Android Authority