Ovislink OV501GF Routed Configuration
Jump to navigation
Jump to search
Note: You might need to set a static IPv4 address manually on your computer with the gateway IP set to http://192.168.1.1 to log in to the modem.
NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem.
- You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
- Call 613-721-1773 x0 to book a Modem Appointment.
| Steps | Menu Navigation | Parameters | |
|---|---|---|---|
| 1 | Log into Modem | http://192.168.1.1 | User Name: admin
Password: admin |
| 2 | WAN Cleanup | Advanced Setup
→ WAN Service |
Remove everything from the WAN Service Table |
| 3 | Enable ADSL | Advanced Setup
→ Layer2 Interface → ATM Interface |
Remove atm0 from the table
Add ATM: vpi:0 vci:35 DSL Latency: FAST and INTERLEAVED |
| 4 | Enable VDSL | Advanced Setup
→ Layer2 Interface → PTM Interface |
Remove ptm0 from the table
Add PTM: DSL Latency: FAST and INTERLEAVED |
| 5 | Configure ADSL | Advanced Setup
→ WAN Service |
Add atm0/(4_0_35) PPPoE (pppoe_4_0_35)
|
| 6 | Configure VDSL | Advanced Setup
→ WAN Service |
Add ptm0/(4_1_1) PPPoE(pppoe_4_1_1.35)
|
| 7 | UPnP | Advanced Setup
→ UPnP |
Disable uPnP |
| 8 | Admin Password | Management
→ Access Controls → Passwords |
|
| 9 | Remote Access | Management
→ TR-069 Client |
|
| 10 | System Log | Management
→ System Log → Configure System Log |
Configuration:
|
| 11 | Internet Time | Management
→ Internet Time |
Time settings:
|
| 12 | Backup Settings | Management
→ Settings → Backup |
Settings -Backup
|
See Also
Modem configuration - Instructions for all NCF modems