Internet service is provided to NCF members with an "up to" speed for both download and upload. This means that the actual speeds delivered may be less than the maximum "up to", for reasons that are out of NCF's control. There are many factors that may affect the actual speed of your connection, and this article will try to address the main ones.
How much speed are you getting?
We experience internet connection slowness in a variety of ways, with some of the most common being websites that are slow to load, streaming media (video or audio) that repeatedly pauses or is interrupted, noticeable freezing or lag during online gaming, or video conferencing that is garbled or choppy. Experiencing slowness on your internet connection can be frustrating, but there are many different possible causes of that slowness that may not be related to the actual speed of your connection. To help narrow down the underlying cause, the best course of action is to take a speed test to provide some accurate data.
For cable internet connections, your connection speed is best measured by running a speed test.
Since cable internet runs on a shared infrastructure that is affected by how many subscribers are using it at any one point in time, we recommend signing up for a faster cable internet plan than what you think you might need. This way if your cable speeds drop due to network congestion, you should still be receiving speeds much closer to what you were expecting.
For DSL internet connections, your connection speed can be measured in two ways:
- Your line profile speed, which your DSL modem detects and records in its line stats. Line Stats shows you how to find out what your modem records the line profile as.
- Your actual achieved speed, which you can determine by running a speed test.
Line Profile Speeds
Why might your line profile be set below the maximum? Because your distance from Bell's DSL equipment or the quality of Bell's copper lines to your house cannot support a higher speed. DSL signal degrades with distance from the DSL equipment and distances over 5 KM tend to be very marginal for DSL signals. Even shorter distances can result in service instability and loss of connection at higher speeds. The cure for this is to slow down the speed to prevent disconnections
You can get some idea of your distance from the DSL equipment and whether distance is an issue for your location, by checking your line attenuation. If the attenuation is high then you are far from the DSL equipment and a lower profile is probably called for to prevent frequent disconnections.
You can see your stats as seen by NCF here. Note the date on that page that says when they were collected. The line profile speed is not necessarily the same as your speed attained.
You will rarely see your line profile speeds reflected exactly on a speed test. There is a service "overhead" on all DSL speeds that means that actually achieved speeds are usually limited to about 85% of the line profile speed. For example, if you have a 10 Mbps download line profile speed this will mean you should see speed test download results around 8.5 Mbps. Similarly, for actually achieved upload speeds on a 800 Kbps upload line profile expect to see the speed test providing an upload speed result around 680 Kbps.
For DSL internet connections, if your DSL plan provides up to 10 Mbps download speeds, and you receive speed test results greater than 8 Mbps in real world conditions, that is normal and you are receiving expected speeds. If you are receiving download download speeds in the range of 5 Mbps or lower then that may indicate a problem.
How to conduct a speed test
To find the speed of your internet connection, try a speed test website and wait for the test to complete. Ideal test conditions are:
- A proper test of your connection should use a wired Ethernet connection.
- With only one device on your network using the internet connection.
- With background internet applications and processes like cloud services (for example, iCloud, Google Drive or torrents) stopped.
- With only the tab for the speed test open in your web browser.
It is normal for the download speed to be much faster than the upload speed. This is intentional, so that you are able to download big files quickly. Normal, good results for 6 Mbps service would be something like 5.2 Mbps download, and about 600 Kbps upload.
- NCF Speed Test
- Primus Internet Speed Test
- SpeakEasy Speed Test
- Meter.net Speed Test
- Speedof.Me Speed Test
- Bandwidth Place Speed Test
- Cira Performance Test
- Netflix-operated Speed Test
Note: Because different test servers are located in different geographical places their results are not comparable to each other and testing the same connection on different speed tests will provide different results. If you use a speed test to monitor your connection over time, then always use the same test.
What if the speed test shows slow speed?
The following factors may cause or contribute to slow speed with your internet connection:
If you receive expected speeds in the morning and late at night, but experience slower connection speeds in the evenings and on weekends then the likely culprit is network congestion.
For cable internet connections, since the cable infrastructure is shared among all subscribers to cable internet in the immediate area, speed test results may vary wildly depending on the time of day you conduct the tests. This is because the more the cable infrastructure is being used, the slower it becomes for everyone using it. NCF does not own or maintain the underlying cable infrastructure, and unfortunately has no ability to address cable network congestion. Network congestion of this sort happens more frequently, and with greater variability, with cable internet based on the technology and infrastructure it uses.
For DSL connections, NCF has investigated DSL network congestion problems in the past and has corrected issues between the NCF network and the Bell Network at the aggregation point. NCF monitors and increases its overall DSL bandwidth on a regular basis to continue to meet member demand, but slowness may occur from time to time on parts of the internet beyond NCF's control, as this article explains.
When you performed the speed test were you the only person using your internet connection? If others are using your connection to watch a video, stream audio, or play games online, that activity will consume connection bandwidth and provide a slower (and inaccurate) speed test result. For best accuracy, ensure you are running speed tests only you are sure no one else is using your internet connection.
Note: If your Wi-Fi connection is not encrypted, it is open to others connecting to it and using your bandwidth without your permission. For the reason, we recommend you always encrypt your Wi-Fi traffic, which you can do by choosing the encryption type in your modemi-Fi settings. All modems sold by NCF have Wi-Fi encryption enabled by default.
Note: If your Wi-Fi connection is not encrypted, it is open to others connecting to it and using your bandwidth without your permission. For the reason, we recommend you always encrypt your Wi-Fi traffic, which you can do by choosing the encryption type in your modem's Wi-Fi settings. All modems sold by NCF have Wi-Fi encryption enabled by default.
Speeds seen when testing via Wi-Fi are almost always slower than when testing over an ethernet connection, unless the device connected wirelessly is very close to the router. This is due to possible sources of wireless interference from other wireless networks, materials or appliances in the vicinity. Likewise, the further the device is from the Wi-Fi router, the weaker the connection and the slower the connection speed.
Each version of the wireless specification is faster than the last, so devices that support Wi-Fi 6 will be faster than Wi-Fi 5 and Wi-Fi 4 devices. Even with an "N" protocol wireless router a laptop being used for a speed test a floor above the router will typically see half the expected speeds.
Some cable internet service plans can exceed the maximum speeds that your wireless device can support. Older network cards that are Fast Ethernet ("10/100") can support a maximum throughput of 100 Mbps, which means if you have a cable service plan with download speeds faster than 100 Mbps will be throttled down by the maximum capability of the network card to 100 Mbps. To ensure you can take advantage of cable internet plans greater than 100 Mbps, ensure your network card supports Gigabit Ethernet ("10/100"1000"), which can support a maximum throughput of 1000 Mbps.
If you are not receiving good speed on your your devices when connected over Wi-Fi, try connecting them to the router with an ethernet cable if you can, and see if that improves the connection speed. See Wi-Fi for more information on troubleshooting Wi-Fi performance.
Any modem should provide comparable speeds on the same line, unless the modem is starting to fail. One possible sign of a failing modem is loss of speed, especially once it is warmed up and has been running for an hour or two.
Poor ventilation for a modem can cause it to overheat, causing poor performance and slower connection speeds, so ensure that your modem has good airflow around it.
For members receiving DSL internet service, if you suspect your DSL modem may be the issue contact our HelpDesk to arrange to borrow a loaner DSL modem to take home and test your connection with.
Running a speed test on an older web browser will often provide slow results, because the browser itself uses out-dated web technology. Make sure your web browser is updated to the latest version to ensure that your web browser isn't limiting or skewing your speed test results. Here is a list of some browsers you may want to consider:
- Apple Safari for macOS
- Brave for Linux, macOS, and Windows
- Chromium for BSD and Linux
- Gnome Web (formerly called "Epiphany") for Linux
- Google Chrome for BSD, Linux, macOS, and Windows
- Midori for BSD, Linux and Windows
- Mozilla Firefox for BSD, Linux, macOS, and Windows
- Mozilla SeaMonkey for BSD, Linux, macOS, and Windows
- SRWare Iron for BSD, Linux, macOS, and Windows
- Vivaldi for Linux, macOS, and Windows
An aging or malfunctioning operating system will not provide accurate speed test results. Microsoft Windows, in particular, can slow over time and can turn in poor results.
To test if your operating system is having an impact on your connect speed, run a speed test on another device and comparing test results, or boot up another operating system on the same device and test using that. A simple, RAM-based operating system, like Puppy Linux is easy to boot into RAM and, with its included Firefox browser, can be used to conduct a speed test. If the speed test results are better than, then the operating system is probably the culprit.
It is also possible that your computer's network or wireless card is failing and producing slow speeds. The easiest way to test this is by using another device to conduct a speed test and then comparing results across devices. Different devices connecting the same way and using the same speed test should provide similar results.
Some cable internet service plans can exceed the maximum speeds that your network card can support. Older network cards that are Fast Ethernet ("10/100") only can support a maximum throughput of 100 Mbps, which means cable service plan with download speeds faster than 100 Mbps will be throttled down by the maximum capacity of the network card to 100 Mbps. To ensure you can take advantage of cable internet plans faster than 100 Mbps, ensure your network card supports Gigabit Ethernet ("10/100"1000"), which can support a maximum throughput of 1000 Mbps.
If nothing works
If none of these hints manages to resolve unexplained slow speed, then your next step should be Troubleshooting.
- The bandwidth bottleneck that is throttling the Internet, by Jeff Hecht, Nature