Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Ovislink OV501GF Bridge Configuration

From Support
Jump to navigation Jump to search

NCF Support is available to make configuring your Ovislink modem easier and to help you avoid potential mistakes.

Note: Your Ovislink OV501GF modem comes pre-configured by default in bridge mode, this means you can connect your router and log in to it to provide your NCF credentials and get internet access:

  • PPPoE username: your DSL username (format: aa000@ncf.ca)
  • PPPoE password: your DSL password

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.

  • You may need an alternate means of accessing the internet to download the configuration file.

2. Call 613-721-1773 x0 to book a Modem Appointment.

If you want to confirm or modify the bridge operation settings in your Ovislink OV501GF, you might need to set a static IPv4 address manually on your computer with the gateway IP set to to log in to the modem, and change or confirm the next parameters.

Steps to Configure OvisLink OV501GF for Bridge Operation
Steps Menu Navigation Parameters
1 Log into Modem User Name: admin

Password: admin

2 WAN Cleanup Advanced Setup

→ WAN Service

Remove atm0.1/ptm01 from WAN Service Table
3 Enable ADSL Advanced Setup

→ Layer2 Interface

→ ATM Interface

Add ATM: vpi:0 vci:35


DSL link type EoA

4 Enable VDSL Advanced Setup

→ Layers2 Interface

→ PTM Interface

Remove ptm0 with Path0


5 Configure ADSL Advanced Setup

→ WAN Service

Add atm0/(4_0_35)
6 Configure VDSL Advanced Setup

→ WAN Service

Add ptm0/(4_1_1)
  • Service type: Bridging
  • 802.1P Priority:1
  • 802.1Q VLAN:35
7 Admin Password Management

→ Access Controls

→ Passwords

  • Username: admin
  • Old Password: admin (or whatever you set it to)
  • New Password: your DSL password
8 Remote Access Management

→ TR-069 Client

  • Disable Inform
9 System Log Management

→ System Log

→ Configure System Log

  • Log:Enable
  • Log Level: Debugging
  • Display Level: Error
  • Mode: Local
10 Backup Settings Management

→ Settings

→ Backup

Settings -Backup
  • Backup Settings

See Also