SmartRG SR506n Routed Configuration

SmartRG SR506n

Sold from Aug 2018 to July 2021

• Home
• Configuration from File
• Routed Configuration
• Bridge Configuration
• Firmware Check and Update
• Changing WiFi Channels on SmartRG modems
• Changing WiFi Name or Password on SmartRG modems
• Changing DNS Settings on SmartRG Modems
• Port Forwarding
• About your SmartRG SR506n
• SmartRG - Manual
• SmartRG - Data Sheet
• Highspeed Tips - SR505n Emulator (differs slightly)

with WiFi

NCF Support is available to make configuring your SmartRG modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your SmartRG modem:

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
   • You may need an alternate means of accessing the internet to download the configuration file.
2. Call 613-721-1773 x0 to book a Modem Appointment.

Steps to Configure SR506N for Routed Operation

	Steps	Menu Navigation	Parameters
1	Log into Modem	http://192.168.1.1 → Manage Gateway (Advanced)	User Name: admin Password: admin
2	WAN Cleanup	Advanced Setup → WAN Service	Remove everything from the WAN Service Table
3	Enable ADSL	Advanced Setup → Layer2 Interface → ATM Interface	Add ATM: vpi:0 vci:35 DSL Latency: FAST and INTERLEAVED
4	Enable VDSL	Advanced Setup → Layer2 Interface → PTM Interface	Remove ptm0 with Path0 Add PTM: DSL Latency: FAST and INTERLEAVED
5	Configure ADSL	Advanced Setup → WAN Service	Add atm0/(4_0_35) PPPoE (pppoe_4_0_35) Network Protocol Selection: IPv4 and IPv6 (Dual Stack) PPPoE username: your DSL username (format: aa000@ncf.ca) PPPoE password: your DSL password Enable Firewall Enable NAT Disable SIP
6	Configure VDSL	Advanced Setup → WAN Service	Add ptm0/(4_1_1) PPPoE(pppoe_4_1_1.35) 802.1P Priority:1 802.1Q VLAN:35 Network Protocol Selection: IPv4 and IPv6 (Dual Stack) PPPoE username: your DSL username (format: aa000@ncf.ca) PPPoE password: your DSL password Enable Firewall Enable NAT Disable SIP
7	UPnP	Advanced Setup → UPnP	Disable uPnP
8	WiFi Name	Wireless	SSID (WiFi Name) to format NCF_0000
9	WiFi Security	Wireless → Security	Disable WPS Network Authentication to WPA2-PSK WPA Passphrase : your DSL password WPA Encryption : AES
10	Admin Password	Management → Access Controls → Passwords	Username: admin Old Password: admin (or whatever you set it to) New Password: your DSL password
11	Disable Support	Management → Access Controls → Accounts	Delete/Modify Account Select Support role Disable Update (at bottom)
12	Remote Access	Management → Management Server	TR-069 Client: Disable ACS URL: https://acs.ncf.ca
13	System Log	Management → System Log	Configure System Log System Log:Enable Log Level: Debugging Display Level: Error Mode: Local
14	Internet Time	Management → Internet Time	First NTP time server: Other : time.nrc.ca
15	Backup Settings	Management → Settings → Backup	Backup Running Settings Save backup file to computer

with separate WiFi Router

Back to the Top

NCF Support is available to make configuring your SmartRG modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your SmartRG modem:

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
   • You may need an alternate means of accessing the internet to download the configuration file.
2. Call 613-721-1773 x0 to book a Modem Appointment.

Configure your modem for Routed Operation

If you have a router, we recommend the following configuration steps:

1. Follow the configuration steps outline for Routed Operation with WiFi and make the following changes:

• Under Wireless, Uncheck the Enable Wireless Option,
• Click Apply/Save

Router Configuration

2. On your router, set the Connection Mode or Type to Automatic IP, Automatic DHCP or Dynamic IP mode.

See Also

Back to the Top

• Modem Configuration - Instructions for all NCF modems
• About SmartRG modem lights
• SmartRG SR505N Changing WiFi Channels
• Dynamic DNS
• Port forwarding with the SmartRG SR505N