View source for SmartRG SR506n Routed Configuration

<div class="ncfrightbox w-20"> {{Template:SmartRG SR506n}} </div>

=with WiFi=
{{Template:SmartRG Config Options}}

{| class="wikitable mw-collapsible"
|+Steps to Configure SR506N for Routed Operation
!
!Steps
!Menu Navigation
!Parameters
|-
|1
|Log into Modem
|<nowiki>http://192.168.1.1</nowiki>

'''→ Manage Gateway (Advanced)'''
|User Name: '''admin'''

Password: '''admin'''
|-
|2
|WAN Cleanup
|'''Advanced Setup'''
'''→ WAN Service'''
|Remove '''ppp0.1''' from '''WAN''' Service Table
|-
|3
|Enable ADSL
|'''Advanced Setup''' 
'''→ Layer2 Interface'''

'''→ ATM Interface'''
|Add ATM: vpi:'''0''' vci:'''35'''
DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|4
|Enable VDSL
|'''Advanced Setup'''
'''→ Layer2 Interface'''

'''→ PTM Interface'''
|Remove '''ptm0''' with '''Path0'''
Add PTM: 
DSL Latency: '''FAST''' and '''INTERLEAVED'''
|-
|5
|Configure ADSL
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''atm0/(4_0_35)'''             PPPoE (pppoe_4_0_35)
* Network Protocol Selection:  '''IPv4 and IPv6 (Dual Stack)'''

* PPPoE username: your DSL username 

* PPPoE password: your DSL password

* Enable '''Firewall'''

* Enable '''NAT'''

* Disable '''SIP'''
|-
|6
|Configure VDSL
|'''Advanced Setup'''
'''→ WAN Service'''
|Add '''ptm0/(4_1_1)'''               PPPoE(pppoe_4_1_1.35)
* 802.1P Priority:'''1''' 

* 802.1Q VLAN:'''35'''

* Network Protocol Selection:  '''IPv4 and IPv6 (Dual Stack)'''

* PPPoE username: your DSL username 

* PPPoE password: your DSL password

* Enable '''Firewall'''

* Enable '''NAT'''

* Disable '''SIP'''
|-
|7
|UPnP
|'''Advanced Setup'''
'''→ UPnP'''
|Disable '''uPnP'''
|-
|8
|WiFi Name
|'''Wireless'''
|SSID (WiFi Name) to format '''NCF_0000'''
|-
|9
|WiFi Security
|'''Wireless'''
'''→ Security'''
|
* Disable '''WPS'''
* Network Authentication to '''WPA2-PSK'''
* WPA Passphrase : your DSL password
* WPA Encryption : '''AES'''
|-
|10
|Admin Password
|'''Management'''
'''→ Access Controls'''

'''→ Passwords'''
|
* Username: '''admin'''

* Old Password: admin (or whatever you set it to)
* New Password: your DSL password
|-
|11
|Disable Support
|'''Management'''
'''→ Access Controls'''

'''→ Accounts'''

|'''Delete/Modify Account'''
* Select '''Support''' role

* '''Disable'''
* '''Update''' (at bottom)
|-
|12
|Remote Access
|'''Management'''

'''→ Management Server'''
|
* TR-069 Client: '''Disable'''
* ACS URL: '''https://acs.ncf.ca'''
|-
|13
|System Log
|'''Management'''

'''→ System Log'''
|Configure System Log
* System Log:'''Enable''' 
* Log Level: '''Debugging'''
* Display Level: '''Error'''
* Mode: '''Local'''
|-
|14
|Internet Time
|'''Management'''

'''→ Internet Time'''
|
* First NTP time server: '''Other :''' '''time.nrc.ca'''
|-
|15
|Backup Settings
|'''Management'''

'''→ Settings'''

'''→ Backup'''
|
* '''Backup''' '''Running Settings'''
* Save backup file to computer
|}

=with separate WiFi Router=
{{Template:Back_to_the_Top}}
{{Template:SmartRG Config Options}}

==Configure your modem for Routed Operation==
If you have a router, we recommend the following configuration steps:

1. Follow the configuration steps outline for [[#with_WiFi|Routed Operation with WiFi]] and make the following changes:
* Under '''Wireless''', Uncheck the '''Enable Wireless''' Option,
* Click '''Apply/Save'''[[File:SR506n-Wireless-Disabled.png|alt=SR506n-Wireless-Disabled|none|thumb|560x560px|SR506n-Wireless-Disabled]]

==Router Configuration==
2. On your router, set the Connection Mode or Type to '''Automatic IP, Automatic DHCP or Dynamic IP mode'''.

[[Category:DSL]]
[[Category:Modems]]

=See Also=
{{Template:Back_to_the_Top}}
*[[Modem Configuration]] - Instructions for all NCF modems
*[[Modem Lights#SmartRG|About SmartRG modem lights]]
*[[:File:Changing_Wireless_Channels_on_SmartRG_SR505N.pdf|SmartRG SR505N Changing WiFi Channels]]
*[[Dynamic DNS]]
*[[Port forwarding#Port_forwarding_on_SmartRG_Modems|Port forwarding with the SmartRG SR505N]]