View source for Changing Wi-Fi Channels on TP-Link EX921v modem

<div class="ncfrightbox w-25"> {{Template:TP-Link EX921v}} </div>
=Preparation=
Updated: October 2025

'''1.''' Connect a computer directly to the TP-Link EX-921v by plugging one end of an Ethernet (RJ-45) cable into any port labeled LAN on the modem, and the other end into the Ethernet port on your computer. Alternatively, you can complete the process over Wi-Fi using a mobile phone, tablet, or laptop, if a wired connection is not available.

'''2.''' Open the browser of your choice and access the modem’s web interface by entering '''http://192.168.0.1''' or '''http://tplinkwifi.net''' into the address bar, then press '''Enter''' or click on '''Go.''' You will be prompted to provide your device's password.

Note: If NCF has already configured your modem, use your Fibre password.

'''3.''' In the menu on the left-hand side, click '''Wireless''', then select '''Wireless Settings'''.

'''4.''' Click Advanced to view parameters for the 2.4 GHz and 5 GHz bands. By default, the channel is set to Auto. You can manually select a specific channel based on which performs best in your area to reduce interference.

'''5.''' To change the channel for the 6 GHz band, click 6 GHz at the top right of the page, then select the desired channel from the dropdown menu.

'''6.''' Once you have adjusted your Wi-Fi settings, click '''Save''' at the bottom of the page to apply the new configuration.

=Images=
{{Template:Back_to_the_Top}}
<gallery mode="slideshow">
File:EX921v WiFi Channels.png|frameless|634x634px|Wi-Fi Channels
</gallery>
{{Template:Back_to_the_Top}}

==See Also==
{{Template:Back_to_the_Top}}