Difference between revisions of "Modem Manuals"
Jump to navigation
Jump to search
(→8960NB, four-port ethernet + "N" Wireless, ADSL: https://web.archive.org/web/20160314125235/https://vanilla.co.za/setup_adsl_tplink_w8960n.php) |
(→8616, one-port modem only, NO PPPoe log-in capability: https://web.archive.org/web/20130626111650/http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide.pdf) |
||
| Line 143: | Line 143: | ||
Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2. | Note that configuring this device on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2. | ||
* [http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide. | * [https://web.archive.org/web/20130626111650/http://www.tp-link.com/Resources/document/TD-8616_V7_User_Guide.pdff Modem Manual] | ||
* [http://www.dslreports.com/forum/r26026121-TekSavvy-Dry-Loop-DSL-TP-Link-TD-8616 PPPoe Configuration (third party)] | * [http://www.dslreports.com/forum/r26026121-TekSavvy-Dry-Loop-DSL-TP-Link-TD-8616 PPPoe Configuration (third party)] | ||
* [http://www.tp-link.com/lb/download/TD-8616.html#Firmware 8816 Firmware] | * [http://www.tp-link.com/lb/download/TD-8616.html#Firmware 8816 Firmware] | ||
Revision as of 13:05, 19 January 2018
| DSL Quick Configuration Info | |
|---|---|
| VPI / VCI (ADSL) | 0.35 |
| VLAN (VDSL) | 35 |
| Protocol | PPPoE |
| DSL username | (eg. aa999@ncf.ca) |
| DSL Password | Starts with 'ncf' (not the same
as your NCF Start Page login) |
The manual for your NCF-supplied DSL modem can be found at the links below.
For instructions on how to configure these modems, see Modem Configuration (DSL)
Note: Modem emulators, that let you try out the modem interface on line, can be found in each of the specific modem sections.
SmartRG Modem
SR505N, four-port ethernet + "N" wireless VDSL
TP-Link Modems
9970, four-port ethernet + "N" wireless ADSL/VDSL
8816, single ethernet port ADSL
- Sold from December 2011
- 8816 User Guide
- 8816 Installation Guide
- NCF modem installation instruction sheet
- 8816 Emulator
- 8816 Firmware
- General TP-Link FAQ
8961ND, four-port ethernet + "N" wireless ADSL
8951ND, four-port ethernet + "N" wireless ADSL
8950ND, four-port ethernet + "N" wireless ADSL
8901G, four-port ethernet + "G" wireless ADSL
8960NB, four-port ethernet + "N" Wireless, ADSL
8616, one-port modem only, NO PPPoe log-in capability
Sagemcom Modem
2864, four-port ethernet + "N" wireless VDSL
Thomson Gateways
NCF sold Thomson modems prior to December 2011. Before 2010, Thomson Gateway (TG) DSL modems ('gateways') were called 'SpeedTouch' (ST).
TG585 DSL modem version 8, four-port ethernet + wireless "G" ADSL
TG585 DSL modem version 7, four-port ethernet + wireless "G" ADSL
ST585 DSL modem version 6, four-port ethernet + wireless "G" ADSL
ST516 modem version 6, single ethernet port ADSL
Bell Modems (not sold by NCF)
Bell 2Wire 2701HG-G, four ethernet ports, wireless "G", ADSL
Speedstream 4200, four ethernet ports, ADSL, no WiFi
Speedstream 5200, four ethernet ports, ADSL
Bell Home Hub 1000, four ethernet ports, wireless "N" ADSL+VDSL
Bell Home Hub 2000, four ethernet ports, wireless "AC" ADSL+VDSL
Huawei Modems (not sold by NCF)
HG622 Modem/Router Four Ethernet ports, Wireless "N" ADSL2+, VDSL
Technicolor Modems (not sold by NCF)
TG582N Modem/Router Four Ethernet ports, Wireless "N" ADSL2+