Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Difference between revisions of "Ovislink OV501GF Routed Configuration"

From Support
Jump to navigation Jump to search
(Created page with "'''Note''': You might need to set a static IPv4 address manually on your computer with the gateway IP set to [https://192.168.1.1 http://192.168.1.1] to log in to the modem....")
 
m
 
Line 1: Line 1:
<div class="ncfrightbox w-25"> {{Template:Ovislink OV501GF}} </div>
'''Note''': You might need to set a static IPv4 address manually on your computer with the gateway IP set to [https://192.168.1.1 http://192.168.1.1] to log in to the modem.  
'''Note''': You might need to set a static IPv4 address manually on your computer with the gateway IP set to [https://192.168.1.1 http://192.168.1.1] to log in to the modem.  



Latest revision as of 14:50, 11 May 2024

Note: You might need to set a static IPv4 address manually on your computer with the gateway IP set to http://192.168.1.1 to log in to the modem.


NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem.

  1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
  2. Call 613-721-1773 x0 to book a Modem Appointment.
Steps to Configure OvisLink for Routed Operation
Steps Menu Navigation Parameters
1 Log into Modem http://192.168.1.1 User Name: admin

Password: admin

2 WAN Cleanup Advanced Setup

→ WAN Service

Remove everything from the WAN Service Table
3 Enable ADSL Advanced Setup

→ Layer2 Interface

→ ATM Interface

Remove atm0 from the table

Add ATM: vpi:0 vci:35 DSL Latency: FAST and INTERLEAVED

4 Enable VDSL Advanced Setup

→ Layer2 Interface

→ PTM Interface

Remove ptm0 from the table

Add PTM: DSL Latency: FAST and INTERLEAVED

5 Configure ADSL Advanced Setup

→ WAN Service

Add atm0/(4_0_35) PPPoE (pppoe_4_0_35)
  • Network Protocol Selection: IPv4 and IPv6 (Dual Stack)
  • PPPoE username: your DSL username (format: aa000@ncf.ca
  • PPPoE password: your DSL password
6 Configure VDSL Advanced Setup

→ WAN Service

Add ptm0/(4_1_1) PPPoE(pppoe_4_1_1.35)
  • 802.1P Priority:1
  • 802.1Q VLAN:35
  • Network Protocol Selection: IPv4 and IPv6 (Dual Stack)
  • PPPoE username: your DSL username (format: aa000@ncf.ca)
  • PPPoE password: your DSL password
7 UPnP Advanced Setup

→ UPnP

Disable uPnP
8 Admin Password Management

→ Access Controls

→ Passwords

  • Username: admin
  • Old Password: admin (or whatever you set it to)
  • New Password: your DSL password
9 Remote Access Management

→ TR-069 Client

  • Disable Inform
10 System Log Management

→ System Log

→ Configure System Log

Configuration:
  • Log:Enable
  • Log Level: Debugging
  • Display Level: Error
  • Mode: Local
11 Internet Time Management

→ Internet Time

Time settings:
  • Automatically synchronize with Internet time servers:Enable
  • First NTP time server:Other: time.nrc.ca
  • Time Zone: (GMT - 5:00) Eastern Time
12 Backup Settings Management

→ Settings

→ Backup

Settings -Backup
  • Backup Settings

See Also

Modem configuration - Instructions for all NCF modems