Difference between revisions of "Changing Wi-Fi Channels on TP-Link EX921v modem"
(Created page with "Updated: October 2025") |
|||
| Line 1: | Line 1: | ||
<div class="ncfrightbox w-25"> {{Template:TP-Link EX921v}} </div> | |||
=Preparation= | |||
Updated: October 2025 | Updated: October 2025 | ||
'''1.''' Connect a computer directly to the TP-Link EX-921v by plugging one end of an Ethernet (RJ-45) cable into any port labeled LAN on the modem, and the other end into the Ethernet port on your computer. Alternatively, you can complete the process over Wi-Fi using a mobile phone, tablet, or laptop, if a wired connection is not available. | |||
'''2.''' Open the browser of your choice and access the modem’s web interface by entering '''http://192.168.0.1''' or '''http://tplinkwifi.net''' into the address bar, then press '''Enter''' or click on '''Go.''' You will be prompted to provide your device's password. | |||
Note: If NCF has already configured your modem, use your Fibre password. | |||
'''3.''' In the menu on the left-hand side, click '''Wireless''', then select '''Wireless Settings'''. | |||
'''4.''' Click Advanced to view parameters for the 2.4 GHz and 5 GHz bands. By default, the channel is set to Auto. You can manually select a specific channel based on which performs best in your area to reduce interference. | |||
'''5.''' To change the channel for the 6 GHz band, click 6 GHz at the top right of the page, then select the desired channel from the dropdown menu. | |||
'''6.''' Once you have adjusted your Wi-Fi settings, click '''Save''' at the bottom of the page to apply the new configuration. | |||
=Images= | |||
{{Template:Back_to_the_Top}} | |||
<gallery mode="slideshow"> | |||
File:EX921v WiFi Channels.png|frameless|634x634px|Wi-Fi Channels | |||
</gallery> | |||
{{Template:Back_to_the_Top}} | |||
==See Also== | |||
{{Template:Back_to_the_Top}} | |||
Latest revision as of 17:08, 23 October 2025
- Home
- Changing Wi-Fi Channels on TP-Link EX921v modem
- [Installation Guide]
Preparation
Updated: October 2025
1. Connect a computer directly to the TP-Link EX-921v by plugging one end of an Ethernet (RJ-45) cable into any port labeled LAN on the modem, and the other end into the Ethernet port on your computer. Alternatively, you can complete the process over Wi-Fi using a mobile phone, tablet, or laptop, if a wired connection is not available.
2. Open the browser of your choice and access the modem’s web interface by entering http://192.168.0.1 or http://tplinkwifi.net into the address bar, then press Enter or click on Go. You will be prompted to provide your device's password.
Note: If NCF has already configured your modem, use your Fibre password.
3. In the menu on the left-hand side, click Wireless, then select Wireless Settings.
4. Click Advanced to view parameters for the 2.4 GHz and 5 GHz bands. By default, the channel is set to Auto. You can manually select a specific channel based on which performs best in your area to reduce interference.
5. To change the channel for the 6 GHz band, click 6 GHz at the top right of the page, then select the desired channel from the dropdown menu.
6. Once you have adjusted your Wi-Fi settings, click Save at the bottom of the page to apply the new configuration.
Images
Wi-Fi Channels
