This is a reference of important resources for DSL modems NCF has sold or members have needed support for over the years. It includes:

NCF created resources
Manufacturer resources
Helpful 3rd-party resources

DSL Quick Configuration Info
VPI / VCI (ADSL)	0.35
VLAN (VDSL)	35
Protocol	PPPoE
DSL username	(eg. aa999@ncf.ca)
DSL Password	Starts with 'ncf' (not the same as your NCF Start Page login)

Note: Modem emulators, that let you try out the modem interface online, can be found in each of the specific modem sections.

SmartRG Modems

Back to the Top

Ovislink Modems |SmartRG Modems | TP-Link Modems | Sagemcom and Bell Modems | Thomson and SpeedTouch Gateways

SmartRG SR516ac

Sold from June 2019

SmartRG SR506n

Sold from Aug 2018 to July 2021

SmartRG SR505n

Sold from Sep 2014 to Aug 2018

TP-Link Modems

Back to the Top

Ovislink Modems |SmartRG Modems | TP-Link Modems | Sagemcom and Bell Modems | Thomson and SpeedTouch Gateways

TP Link TD-W9970

Sold from Jan 2016 to Oct 2017

⚠TP-Link TD-W8961ND

Sold from Jan 2016 to Oct 2017

⚠ Known Security Vulnerability - Some Versions

⚠TP-Link TD-W8951ND

Sold from Nov 2012 to Jan 2016

⚠ Known Security Vulnerability - Some Versions

TP-Link TD-W8960NB

TP-Link TD-W8950ND

Sold from Dec 2011 to Oct 2012

⚠TP-Link TD-W8901G

Sold from Dec 2011 to Oct 2012

⚠ AVOID/REPLACE - Known Security Vulnerability

⚠TP Link TD-8816

Sold from December 2011 to October 2017
⚠ Known Security Vulnerability - Some Versions

TP-Link TD-8616

Strictly a modem, does not have the capability to dynamically assign an IP address to any hosts. Use modem manual for configuration (Especially Section 3.1)

Configuring on a computer with more than one Ethernet interface requires that you temporarily disable one of them, due to the 8616's lack of DHCP services. So, issue a terminal command of "ifconfig eth0 down" before configuring the modem. The modem only requires a VPI and VCI. It is not necessary to specify PVC2.