Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Ovislink OV935WVA Bridge Configuration

From Support
Jump to navigation Jump to search

NCF Support is available to make configuring your Ovislink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your Ovislink modem:

1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.

  • You may need an alternate means of accessing the internet to download the configuration file.

2. Call 613-721-1773 x0 to book a Modem Appointment.

If you prefer using your own external router to the one built into your Ovislink unit, we recommend routed operation with a separate Wi-Fi Router. However if you have networking expertise and are confident using the modem in bridge mode then take note of the following before configuring your Ovislink for Bridged operation:

1. Once you complete configuring your Ovislink modem for Bridged operation and disconnect from the modem, the Modem's Web Interface will become inaccessible with Auto DHCP settings on your computer. We recommend:

  • Backup Settings: It is particularly important to backup the Running Settings on your modem before and after you configure it.
  • Manual IP: Setting a static IPv4 address on your computer, with the gateway IP set to to regain access to the modem.
  • Reset the modem: If you need to reset the modem, insert a paper-clip in the Reset hole on the back. Hold for 10 seconds to reset.

2. If you set up the modem for Bridge operation, then your router will need to be configured in PPPoE mode with your DSL username and password.

Steps to Configure OvisLink for Bridge Operation
Steps Menu Navigation Parameters
1 Log into Modem User Name: admin

Password: admin

2 WAN Cleanup Advanced Setup

→ WAN Service

Remove ppp0.1 from WAN Service Table
3 Enable ADSL Advanced Setup

→ Layer2 Interface

→ ATM Interface

Add ATM: vpi:0 vci:35


4 Enable VDSL Advanced Setup

→ Layers2 Interface

→ PTM Interface

Remove ptm0 with Path0


5 Configure ADSL Advanced Setup

→ WAN Service

Add atm0/(4_0_35) Bridge (br_4_0_35)
6 Configure VDSL Advanced Setup

→ WAN Service

Add ptm0/(4_1_1) Bridge(br_4_1_1.35)
  • 802.1P Priority:1
  • 802.1Q VLAN:35
7 WiFi Wireless Disable Wireless
8 Admin Password Management

→ Access Controls

→ Passwords

  • Username: admin
  • Old Password: admin (or whatever you set it to)
  • New Password: your DSL password
9 Remote Access Management

→ TR-069 Client

  • Disable Inform
10 System Log Management

→ System Log

→ Configure System Log

  • Log:Enable
  • Log Level: Debugging
  • Display Level: Error
  • Mode: Local
11 Internet Time Management

→ Internet Time

Time settings:
  • Automatically synchronize with Internet time servers:Enable
  • First NTP time server:Other: time.nrc.ca
  • Time Zone: (GMT - 5:00) Eastern Time
12 Backup Settings Management

→ Settings

→ Backup

Settings -Backup
  • Backup Settings

See Also