Difference between revisions of "Template:SmartRG Config from File"
m |
m |
||
| Line 7: | Line 7: | ||
2. Enter http://192.168.1.1 info the address bar at in your web browser. Click on '''Manage Gateway (advanced)''' and login with username: '''admin''' and password: '''admin''' (if your modem has been properly reset. If not try your '''NCF DSL password'''). | 2. Enter http://192.168.1.1 info the address bar at in your web browser. Click on '''Manage Gateway (advanced)''' and login with username: '''admin''' and password: '''admin''' (if your modem has been properly reset. If not try your '''NCF DSL password'''). | ||
[[File:SR505n-Login Page.png|alt=SmartRG | [[File:SR505n-Login Page.png|alt=SmartRG Login Page|none|thumb|540x540px|SmartRG Login Page]] | ||
= Uploading the File = | = Uploading the File = | ||
| Line 14: | Line 14: | ||
* Click on the '''Browse''' link (in the Update Running Broadband Router Settings section) and navigate to the custom configuration file you saved. | * Click on the '''Browse''' link (in the Update Running Broadband Router Settings section) and navigate to the custom configuration file you saved. | ||
* Click on '''Update Running Settings'''. | * Click on '''Update Running Settings'''. | ||
[[File:SR505n-Settings-Update.png|alt= | [[File:SR505n-Settings-Update.png|alt=SmartRG-Settings-Update- Running Settings|none|thumb|916x916px|SmartRG-Settings-Update-Running Settings]] | ||
4. Once the file upload begins, it can take 2 to 5 minutes to be completed and for your modem to be fully connected online. Resist the urge to make changes to the modem's configuration during this time. | 4. Once the file upload begins, it can take 2 to 5 minutes to be completed and for your modem to be fully connected online. Resist the urge to make changes to the modem's configuration during this time. | ||
[[File:SR505n-Update.png|alt= | [[File:SR505n-Update.png|alt=SmartRG-Update- Upload in progress|none|thumb|724x724px|SmartRG-Update- Upload in progress]] | ||
=See Also= | =See Also= | ||
Revision as of 08:47, 12 February 2019
Sold from Aug 2018 to July 2021
- Home
- Configuration from File
- Routed Configuration
- Bridge Configuration
- Firmware Check and Update
- Changing WiFi Channels on SmartRG modems
- Changing WiFi Name or Password on SmartRG modems
- Changing DNS Settings on SmartRG Modems
- Port Forwarding
- About your SmartRG SR506n
- SmartRG - Manual
- SmartRG - Data Sheet
- Highspeed Tips - SR505n Emulator (differs slightly)
Your SmartRG modem can be configured for Routed or Bridged Operation by a custom configuration file. The custom configuration will include parameters specific to your NCF account.
1. Request a custom configuration file from support@ncf.ca and save it at a location you will remember.
Log into Modem Web Interface
2. Enter http://192.168.1.1 info the address bar at in your web browser. Click on Manage Gateway (advanced) and login with username: admin and password: admin (if your modem has been properly reset. If not try your NCF DSL password).
Uploading the File
3. Go to the Management Menu link, and then click on the Settings sub-menu link and then on the Update.
- Click on the Browse link (in the Update Running Broadband Router Settings section) and navigate to the custom configuration file you saved.
- Click on Update Running Settings.
4. Once the file upload begins, it can take 2 to 5 minutes to be completed and for your modem to be fully connected online. Resist the urge to make changes to the modem's configuration during this time.
See Also
- Modem Configuration - Instructions for all NCF modems
- About SmartRG modem lights
- SmartRG SR505N Changing WiFi Channels
- Dynamic DNS
- Port forwarding with the SmartRG SR505N