Head blueLogoText.gif NCF HelpWiki
Help | StartPage

Ovislink OV935WVA Routed Configuration

From Support
Revision as of 14:40, 11 May 2024 by GC884 (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

with WiFi

NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem.

  1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca.
  2. Call 613-721-1773 x0 to book a Modem Appointment.
Steps to Configure OvisLink for Routed Operation
Steps Menu Navigation Parameters
1 Log into Modem http://192.168.1.1 User Name: admin

Password: admin

2 WAN Cleanup Advanced Setup

→ WAN Service

Remove everything from the WAN Service Table
3 Enable ADSL Advanced Setup

→ Layer2 Interface

→ ATM Interface

Remove atm0 from the table

Add ATM: vpi:0 vci:35 DSL Latency: FAST and INTERLEAVED

4 Enable VDSL Advanced Setup

→ Layer2 Interface

→ PTM Interface

Remove ptm0 from the table

Add PTM: DSL Latency: FAST and INTERLEAVED

5 Configure ADSL Advanced Setup

→ WAN Service

Add atm0/(4_0_35) PPPoE (pppoe_4_0_35)
  • Network Protocol Selection: IPv4 and IPv6 (Dual Stack)
  • PPPoE username: your DSL username (format: aa000@ncf.ca
  • PPPoE password: your DSL password
  • Enable Firewall
  • Enable NAT
  • Disable SIP
6 Configure VDSL Advanced Setup

→ WAN Service

Add ptm0/(4_1_1) PPPoE(pppoe_4_1_1.35)
  • 802.1P Priority:1
  • 802.1Q VLAN:35
  • Network Protocol Selection: IPv4 and IPv6 (Dual Stack)
  • PPPoE username: your DSL username (format: aa000@ncf.ca)
  • PPPoE password: your DSL password
  • Enable Firewall
  • Enable NAT
  • Disable SIP
7 UPnP Advanced Setup

→ UPnP

Disable uPnP
8 WiFi 5GHz Name Wireless

→ 5 GHz Band

SSID (WiFi Name) to format NCF_0000
9 WiFi 5 GHz Security Wireless

→ 5 GHz Band

Security

Disable WPS
  • Network Authentication to WPA2-PSK
  • WPA Passphrase : your DSL password
  • WPA Encryption : AES
10 WiFi 2.4 GHz Name Wireless

→ 2.4 GHz Band

SSID (WiFi Name) to format NCF_0000
11 WiFi 2.4 GHz Security Wireless

→ 2.4 GHz Band

Security

  • Disable WPS
  • Network Authentication to WPA2-PSK
  • WPA Passphrase : your DSL password
  • WPA Encryption : AES
12 Admin Password Management

→ Access Controls

→ Passwords

  • Username: admin
  • Old Password: admin (or whatever you set it to)
  • New Password: your DSL password
13 Remote Access Management

→ TR-069 Client

  • Disable Inform
14 System Log Management

→ System Log

→ Configure System Log

Configuration:
  • Log:Enable
  • Log Level: Debugging
  • Display Level: Error
  • Mode: Local
15 Internet Time Management

→ Internet Time

Time settings:
  • Automatically synchronize with Internet time servers:Enable
  • First NTP time server:Other: time.nrc.ca
  • Time Zone: (GMT - 5:00) Eastern Time
16 Backup Settings Management

→ Settings

→ Backup

Settings -Backup
  • Backup Settings

with separate WiFi Router

NCF Support is available to make configuring your OvisLink modem easier and to help you avoid potential mistakes. Here are simpler configuration options for your OvisLink modem:

  1. You can request a custom configuration file for your NCF DSL connection from support@ncf.ca. You may need an alternate means of accessing the internet to download the configuration file.
  2. Call 613-721-1773 x0 to book a Modem Appointment.

Configure your modem for Routed Operation

If you have a router, we recommend the following configuration steps:  

  1. Follow the configuration steps outline for Routed Operation with WiFi and make the following changes:
    • Under Wireless, Uncheck the Enable Wireless Option
    • Click Apply/Save

Router configuration

2. On your router, set the Connection Mode or Type to Automatic IP, Automatic DHCP or Dynamic IP mode

See Also